Unpacking The Tabletop Tape Drive; Selecting A Location For The Tabletop Tape Drive - Quantum DLT S4 User Manual

Unpacking the Tabletop Tape Drive

Selecting a Location for the Tabletop Tape Drive

DLT-S4 Product Manual
Before you begin, clear a desk or table so that you can unpack the tape
drive.
If the room in which you are working differs from the
Note:
temperature at which the tape drive was shipped or stored by
30 ºF (17 ºC) or more, let the tape drive acclimate to the
surrounding environment for at least 12 hours before opening
the shipping carton.
Unpack and inspect the tape drive for shipping damage. If you notice any
damage, report it both to the sales representative and to the shipping
company immediately.
Save the packing materials in case you need to move or
Caution:
ship the tape drive in the future. When returning a unit to
Quantum for repair, you must use the original or
equivalent packing materials or risk voiding your
warranty.
Select a location for the tape drive that is flat, sturdy, level, and close to
the server or workstation. There should be sufficient room for the tape
drive to sit without being crowded. A desk or tabletop surface is most
suitable. Regardless of the location you choose for the tape drive, make
sure the environment is free from dust, cigarette smoke, and excessive
temperature and humidity. See the
acceptable operating temperature and humidity limits.
Be sure to follow these additional guidelines when selecting a location for
the tape drive:
• Allow at least 6 inches (15.2 cm) behind the tape drive for proper
cooling.
Chapter 12 Installing the Tabletop Tape Drive
Unpacking the Tabletop Tape Drive
Physical Specifications
12
12
on page 38 for
101