Table of Contents
Advertisement
9 9 9 9 - - - - 2 Stitch length
2 Stitch length
2 Stitch length
2 Stitch length
The stitch length can be adjusted from 2 to 5mm with no step. The following table shows
the stitch length with the number of stitches within 1 inch (25.4mm) and 30mm.
Stitch length
(mm)
2
3
5
■ T o change the stitch length
1.
Loosen nut A while checking the direction in which
the nut is loosened.
2.
To decrease the stitch length, turn screw B clockwise.
To increase the stitch length, turn screw B counterclockwise.
3.
After this adjustment is made by turning screw B, be sure to tighten screw A.
< Note >
Be sure turn off the motor when changing the stitch length.
【10】ADJUSTING THE PRESSER FOOT
10- - - - 1 Presser foot pressure
10
10
10
1 Presser foot pressure
1 Presser foot pressure
1 Presser foot pressure
The presser foot pressure should be as light as possible,
yet be sufficient to feed the fabric and produce uniform
stitches. To increase the presser foot pressure, turn
the adjusting knob clockwise.
10- - - - 2 Position of the presser foot
10
10
10
2 Position of the presser foot
2 Position of the presser foot
2 Position of the presser foot
Fit the presser foot onto the presser bar so that the
needle can drop correctly to the center of the needle
drop hole on the presser foot. Adjustment is made by
loosening screw A. The left-to-right play adjustment
on the presser foot is made by loosening nuts B.
Create a clearance of 0.5mm as shown in the
illustration on the right.
No. of stitches
within 1"
within 30mm
13
15
8.5
10
5
6
16
Advertisement
Table of Contents
