Table of Contents
Advertisement
INSTRUCTIONS FOR USE
BAFFLE PLATES
The baffle plates are located in the upper part of the combustion chamber. The plates holds back smoke, making sure it stays
inside the combustion chamber for a longer time before escaping through the chimney. This reduces the flue gas temperature as
the gases have more time to dissipate heat to the stove.
The baffle plates must be removed for sweeping; see "Maintenance". Note that the baffle plates are made of porous, ceramic
material, and are liable to break easily. You should therefore handle them with care.
The baffle plates are subject to wear and tear and not coverec by the warranty.
ASH CONTAINER
¬
Open the door and the grate in the bottom of the stove and lift out the ash container.
¬
The ash container must not be become too full and must therefore be emptied at regular intervals.
¬
Never empty ashes into a flammable container. Ashes can contain glowing embers long after you finish operating the stove.
COMBUSTION AIR
Combustion air is pre-heated and fed indirectly to the fire. The combustion air flow determines the heat output from your built-in
stove. At the same time, the air flow cleans the glass pane to prevent buid-up of soot. If there is a soot formation on the glass, this
is often due to the fact that the combustion air is turned too much down.
When lighting the fire, the combustion air should be fully open.
Scan 5003
NAVN:
MATERIALE:
M3 NR.:
C:\Working Folder\Designs\Scan 5003\95003006.idw
STI:
22
Spjældregulering
EMNE:
DIM.:
AREAL:
Closed
N/A
VÆGT:
DATO:
N/A
DK-5492 Vissenbjerg©
Open
95003006
TG.NR:
sr
05-07-2017
SIGN:
Scan A/S
A ( 1 : 1
Advertisement
Table of Contents
