Related Manuals for SCAN 5006-S FR
Summary of Contents for SCAN 5006-S FR
- Page 1 5006-S FR UK - ASSEMBLY AND INSTRUCTIONS MANUAL SCAN 5006-S FR ASSEMBLY AND INSTRUCTION MANUAL SCAN 5006-S FR...
- Page 2 5006-S FR CONGRATULATIONS ON YOUR NEW SCAN BUILT-IN STOVE You have purchased a product by one of Europe’s leading manufacturers of wood-bur- ning stoves, and we are sure that you will have years of pleasure from your purchase. To make the best possible use of your stove, it is important that you follow our advice and instructions.
-
Page 3: Table Of Contents
CONTENTS ¬ ¬ TECHNICAL DATA Installation Dimension sketch and minimum distances Safety Type plate Technical data and dimensions Product registration number ¬ ¬ ASSEMBLY Tools for the mounting of the built-in stove Minimum distance to flammable materials Loose parts Building in the stove at a fire wall Additional accessories Safety distance Disposal of packaging... -
Page 4: Technical Data
Any changes made to the product by the dealer, fitter or user could result in the product and safety functions not functioning as intended. The same applies to the fitting of accessories or extra equipment not supplied by Scan A/S. This could also be the case if parts that are necessary for the operation and safety of the stove are dismantled or removed. -
Page 5: Technical Data And Dimensions
Senotherm No x @ 13% O mg/Nm Max. log length 33 cm Efficiency 83,56 Weight Scan 5006-S FR/FL 190 kg Energy efficiency index Flue conn. piece internal diameter 132 mm Energy efficiency class Flue conn. piece external diameter 149 mm... -
Page 6: Dimension Sketch And Minimum Distances
DIMENSION SKETCH AND MINIMUM DISTANCES... - Page 7 MINIMUM DISTANCES...
-
Page 8: Type Plate
PRODUCT REGISTRATION NUMBER All Scan built-in stoves are provided with a product registration number. Please make a note of this number at the rear page of this manual; you will always need to quote it when contacting your dealer or Scan A/S. -
Page 9: Assembly
Heat-storage stones (see page 14) ¬ Detachable handle DISPOSAL OF PACKAGING Your Scan built-in stove may come supplied with the following packaging: The wood packaging can be reused and after final use can be incinerated as a CO neutral Wood packaging product or sent for recycling. -
Page 10: Floor Plate
Your local Scan dealer can advise you on regulations concerning protection of flammable materials in the vicinity of your stove. The floor plate’s function is to protect the floor and flammable material against any sparks that may occur. -
Page 11: Convection Air
Min. area for ingoing convection air: 500 cm ¬ Min. area for outgoing convection air: 760 cm If there is not enough convection air, the covering may be damaged. Do not obstruct the convection holes. Scan 5004-S FRL Scan 5003-S FL Drawing 17-06-2019... -
Page 12: Existing Chimney And Pre-Fabricated Element Chimney
EXISTING CHIMNEY AND PRE-FABRICATED ELEMENT CHIMNEY If you intend to connect your stove to an existing chimney, it makes sense to contact an authorised Scan dealer, or a local chimney sweep, for advice. These experts will also let you know if your chimney needs renovating. -
Page 13: Fresh Air Intake
NOTE: If the stove has a fresh air connexion or closed combustion, the ventilation pipe must be open, when the stove is in use! FRESH AIR BOX FOR FLOOR (ACCESSORY) A fresh air box and connection pipe (Ø 100 mm) are available as accessories. Drawing Friskluftsadapter Scan 5006 FR/FL 03-06-2020 95006005 Name: Date:... -
Page 14: Clips For Norway (Large Rooms)
M3 NR.: DIM.: AREAL: Scan A/S DK-5492 Vissenbjerg© C:\Working Folder\Designs\Scan 5003\95003019.idw STI: HEAT-STORAGE SYSTEM (ACCESSORY) Heat-storage stones are made from a special material with a high heat capacity. The stones are heated when the stove is on, re-releasing heat once it is off. This extends the time over which the stove remains warm. -
Page 15: Mounting Of The Heat Shields/Convection Covers
Stove: Name: Date: number: Constructed /Changed by: Material: Weight: Articlenumber: Area: SCAN A/S DK-5492 Vissenbjerg© C:\Working Folder\Designs\Scan 5002\95002014.iam Path: Place the heat shield on top of the built-in stove Montage at varmeskjold Scan 5002 EMNE: TG.NR: 95002007 20-06-2017 TERIALE: VÆGT:... - Page 16 MATERIALE: VÆGT: M3 NR.: DIM.: AREAL: Scan A/S First mount the lateral heat DK-5492 Vissenbjerg© C:\Working Folder\Designs\Scan 5003\95003010.idw STI: shields on the stove and then the rear heat shield 1 : 2 ) Montage af varmeskjold Scan 5003 95003011 NAVN: EMNE: TG.NR:...
- Page 17 B ( 1 : 4 ) Montage at varmeskjold Scan 5002 NAVN: EMNE: MATERIALE: VÆGT: M3 NR.: DIM.: AREAL: C:\Working Folder\Designs\Scan 5002\95002012.idw STI: Montage at varmeskjold 95003012 MNE: TG.NR: 12-07-17 VÆGT: DATO: SIGN: AREAL: Scan A/S DK-5492 Vissenbjerg©...
- Page 18 TG.NR: 12-07-17 DATO: SIGN: MATERIALE: VÆGT: M3 NR.: DIM.: AREAL: Scan A/S E ( 1 : 4 ) DK-5492 Vissenbjerg© C:\Working Folder\Designs\Scan 5003\95003015.idw STI: Montage at varmeskjold Scan 5003 95003015 NAVN: EMNE: TG.NR: Montage at varmeskjold Scan 5003 DATO: 12-07-17...
-
Page 19: Before Mounting Of Surrounding
BEFORE MOUNTING OF SURROUNDING Remember to cut out the hole for top outlet, rear outlet, or fresh air before placing the stove in the framing material! Drawing Montage af omramning Scan 5003-S FR/FL 08-08-2019 95003057B Stove: Name: Date: number: Constructed/Changed by:... -
Page 20: Mounting Of Surrounding
N a m e : T e n s o P 1 4 k l i p s D a t e : D r a w i n g Drawing Preload Tenso P 14 værktøj Scan 5003-S FR/FL 04-07-2019 95003066 Stove: Name: Date:... - Page 21 MOUNTING OF SURROUNDING Drawing Montage af omramning Scan 5003-S FR/FL 30-04-2019 95003063 Stove: Name: Date: number: Constructed/Changed by: Material: Weight: Articlenumber: Area: SCAN A/S DK-5492 Vissenbjerg© C:\Working Folder\Designs\Scan 5003\95003063.idw Path: Montage af omramning Scan 5003-S FR/FL Stove: Name: Material: Articlenumber:...
- Page 22 MOUNTING OF SURROUNDING Drawing Montage af omramning Stove: Scan 5003-S FR/FL Name: Date: 08-08-2019 number: Constructed/Changed by: Material: Weight: Articlenumber: Area: SCAN A/S Drawing Montage af omramning Scan 5003-S FR/FL 08-08-2019 95003060 Name: Date: DK-5492 Vissenbjerg© number: C:\Working Folder\Designs\Scan 5003\95003059.idw...
- Page 23 MOUNTING OF SURROUNDING Drawing Montage af omramning Name: Date: 08-08-2019 95003057 number: Constructed/Changed by: Drawing Montage af omramning Scan 5003-S FR/FL 08-08-2019 95003056 Stove: Name: Date: number: Weight: Area: SCAN A/S Constructed/Changed by: Material: DK-5492 Vissenbjerg© r\Designs\Scan 5003\95003057.idw Weight: Articlenumber:...
- Page 24 95003053 Date: number: Constructed/Changed by: eight: Area: SCAN A/S DK-5492 Vissenbjerg© esigns\Scan 5003\95003053.idw Drawing Montage af omramning 95003053 Stove: Scan 5003-S FR/FL Name: Date: 08-08-2019 Drawing number: Montage af omramning Stove: Scan 5003-S FR/FL Name: Date: 08-08-2019 number: Constructed/Changed by:...
- Page 25 MOUNTING OF SURROUNDING Drawing Montage af omramning Scan 5003-S FR/FL 08-08-2019 Stove: Name: Date: number: Constructed/Changed by: Material: Weight: Articlenumber: Area: SCAN A/S DK-5492 Vissenbjerg© C:\Working Folder\Designs\Scan 5003\95003049.idw Path: Drawing Omramning 15-08-2019 95003049B Date: number: Constructed/Changed by: eight: Area: SCAN A/S DK-5492 Vissenbjerg©...
- Page 26 MOUNTING OF SURROUNDING Priming and painting Drawing Drawing Montage af omramning 30-04-2019 95003046B Name: Date: Montage af omramning Stove: Scan 5003-S FR/FL Name: Date: 30-04-2019 number: number: Constructed/Changed by: Constructed/Changed by: Material: Weight: Area: SCAN A/S Weight: Articlenumber: Area: SCAN A/S DK-5492 Vissenbjerg©...
-
Page 27: Instructions For Use
When lighting the fire, the combustion air should be fully open. Closed Open Spjældregulering Scan 5003 95003006 NAVN: EMNE: TG.NR: 05-07-2017 MATERIALE: VÆGT: DATO: SIGN: M3 NR.: DIM.: AREAL: A ( 1 : 1 Scan A/S DK-5492 Vissenbjerg© C:\Working Folder\Designs\Scan 5003\95003006.idw STI:... -
Page 28: Instructions For Heating
LIGHTING We recommend the use of fire lighters, or similar products, which are available from your Scan dealer. Using fire lighters helps light the wood more quickly and keeps the combustion process clean. See our video about correct firing on www.scan-stoves.com or scan the QR-code. Please note Scan the QR-code that this video is only intended as a guide. -
Page 29: Continuous Operation
CONTINUOUS OPERATION It is important to obtain as high a temperature as possible in the combustion chamber. This results in best possible use of the stove and fuel, as well as achieving clean combustion. In this way you will avoid build-up of soot on the combustion chamber lining and glass pane. -
Page 30: Selecting Wood/Fuel
HANDLING OF THE FUEL SELECTING WOOD/FUEL You can use any type of wood as fuel. However harder woods, such as beech or ash, are generally better for heating, as they burn more evenly and create less ash. Other woods, such as maple, birch and spruce, are excellent alternatives. PREPARATION The best fuel is obtained where the tree has been felled and the wood sawn and split before May 1st. -
Page 31: Sweeping The Chimney And Cleaning The Stove
CHECKING THE STOVE Scan A/S recommends that you check your stove thoroughly after sweeping/cleaning. Check all visible surfaces for cracks. Check that all joints are tight and that the gaskets are correctly seated. Worn or deformed gaskets should be replaced. -
Page 32: Gaskets
AREAL: Krog Iversen & Co A/S MATERIALE: VÆGT: DATO: 08-01-2018 SIGN: DK-5492 Vissenbjerg© C:\Working Folder\Designs\Scan 5003\95003029.idw STI: DIMENSION: AREAL: Krog Iversen & Co A/S DK-5492 Vissenbjerg© C:\Working Folder\Designs\Scan 5003\95003030.idw STI: Place baffle fitting #6 on the edge of the chamotte plates #3, #4a, #4b and #4c. Then place the lower baffle plate #5. -
Page 33: Cleaning The Glass
CLEANING THE GLASS Our stoves are designed to prevent serious soot build-up on the glass. The best way to achieve this is to make sure you have a good supply of combustion air. It is also very important that the wood is dry and the chimney correctly dimensioned. Even if you operate the stove in accordance with our instructions, a slight film of soot may still accumulate on the glass. - Page 34 TROUBLESHOOTING SMOKE ESCAPING ¬ Damp wood ¬ Chimney not drawing properly ¬ Chimney is not properly dimensioned for the built-in stove ¬ Check if the smoke gas pipe/chimney are blocked ¬ Is the chimney the right height for its surroundings? ¬...
- Page 35 You must quote your stove‘s product registration number when you contact us or your authorised Scan dealer with a warranty claim. The warranty covers all parts which in the opinion of Scan A/S require repair or replacement due to manufacturing or construc- tion error The warranty applies to the original purchaser of the product only, and is not transferable (except on prior sale).
- Page 36 NOTES...
- Page 40 Product registration number Quote this number at all enquiries Edition: UK 95006501 10059355-P02 SCAN A/S Damsbovej 1 DK-5492 Vissenbjerg www.scan-stoves.com 26.11.2021...