Directed DIRECTWIRE DIRECTECHS THGMN4 Installation Manual page 16

Pair remotes (if applicable).
Important! For most vehicles in the GM9 firmware, remote pairing requires the vehicle's
ignition to be turned ON. If any issues are encountered during the remote pairing process, try
10
starting the vehicle at the specific step where the ignition would be turned ON.
For information on how to pair a specific remote, please refer to its corresponding owner
documentation, which can be found inside the product packaging of the complete system or
on www.directechs.com.*
DATA/Hardwired Tach Learning: When using Data Tach, it is recommended to follow the
Tach Learning procedure. However, when using a Hardwired Tach, the procedure is
11
mandatory.
For more information, refer to the Tach Learning procedure section.
* Your aftermarket remote may differ from the model shown in the illustrations.
You have successfully completed the module programming sequence.
16
933.GM9 2.46.198.9 2022 Chevrolet Equinox (Smart Key)
©2023 Directed. All rights