Table of Contents
Advertisement
CAR-O-LINER
p. 12
MOVABLE SPOT WELDER
This machine complies with the 89/392/CEE directives and subsequent modifications and
supplements.
ENVIRONMENT
Working ambient temperature: 5°C to 35°C.
Working air humidity: lower than 90%.
.
STARTING THE MACHINE
WARNING: The first start-up of the spot welder must be made by qualified personnel.
Before performing any welding operation, checks and adjustments must be made
.
Make sure the electrical connection has been made properly and in compliance with the
applicable regulations.
Check the diameter and the good state of the welding electrode tips.
Turning on: operate (close) the main switch, the display and the red LEDs indicate that the
spot welder is properly energized.
Turning off: Operate (open) the main switch. The spot welder and the display turn off.
WARNING: The spot welder must be used by trained personnel
.
WELDING WITH MANUAL GUN
Welding gun with manual start switch. All the welding operations are controlled
pushing the switch an the gun.
WELDING WITH GUN EASY START
The use of TOP CAR 28 is to make easy by a special electronic circuit of automatic
start, that consent the use of a gun with out start switch, this makes welding easyer
and all heating operations. Easy start, begin the welding cycle after 3/10 sec from
the contact electrode-metal sheet.
Hide quick links:
Advertisement
Table of Contents
