Start-Up; Limit Of Use - Car-O-Liner CR35 Instruction Manual

CAR-O-LINER p. 11
MOVABLE SPOT WELDER
This machine complies with the 89/392/CEE directives and subsequent modifications and
supplements.

START-UP

WARNING: Remember some safety precautions to be taken in order to avoid hazardous
situations.
The operator must have adequate knowledge and training in resistance welding
procedures (spot welding) with this type of spot welder.
Do not allow unauthorized persons to access the working area.
Avoid that more then one person works simultaneously on the same spot welder.
The spot welder is equipped with mobile elements, welding arms and electrodes.
CAUTION:
Do not wear magnetic metal objects as rings, bracelets, watches etc. during welding
operations, because these objects can be violently attracted by the magnetic field
generated by the spot welder or considerably overheated due to the Joule effect and
cause burns.
The operator must wear safety glasses, gloves and an apron to protect himself against
burns, cuts in the hands and sparkling incandescent particles.
Note: The individual protective systems must be in compliance with the applicable
Regulations.

LIMIT OF USE

This spot welder has been designed, dimensioned and manufactured for resistance
welding on thin steel sheet (fig.1, p.6, Electrical Features). Any use with different welding
procedures, non-iron metals, different sheet thickness or with more duty cycles as
indicated may affect proper operation and cause damage to the spot welder.
Therefore the machine must be destined only for the use foreseen and described in this
manual, any other use is to be considered improper and may cause hazards to the
operator's safety and material damage.
The manufacturer cannot be held liable for possible personal injuries or material damage
arising from improper or unreasonable use.