Menu Structure; Auto Show; Static Color - ProLights BATPAR12UTRI User Manual

3.3 MENU STRUCTURE

MENU
1
DMX Personality and
Starting Address
2
3 Static Colors
4 Auto Programs
5 Programs Speed
6 Sound Active
7 Sound Sensitivity
8 Custom Color Mixing U--
9 Dimmer
10 Infrared

3.4 AUTO SHOW

This fixture has a built-in automatic program. To access this, please see the below instructions:
• Press the button MENU so many times until shows P-- , then press the button ENTER.
• Using UP/DOWN button, select one of the programs P1 - P4.
• Press the button ENTER to confirm.
• Press the button MENU until S-- appears on the display.
• Use the button UP/DOWN to select the auto programs speed S001 - S100 (slow-fast).
• Press the button ENTER save the setting.

3.5 STATIC COLOR

This fixture has the ability to accept custom static color settings. Access these chases via the control panel
on the back of the fixture.
• Press the button MENU so many times until shows C-- , then press the button ENTER.
• Using UP/DOWN button, select one of the programs C1 - C7.
• Press the button ENTER to confirm.
BATpAR12UTRi
ð
3 CH
d1 - d512
ð
8 CH d1 - d512
ð
C--
C1 - C7
ð
P-- P1 - P4
ð
S-- S1 - S100
ð
Snd Snd1 - Snd2
ð
SenS u0 - u100
ð
r0 - r255
ð
g0 - g255
ð
b0 - b255
ð
dIM OFF
ð
dIM1
ð
dIM2
ð
dIM3
ð
SET
ON
ð
OFF
Selects DMX personality and DMX starting
value
Selects 1 of 4 auto programs
Sets auto program speed (slow to fast)
Selects Sound Active mode
Sets sound sensitivity (low to high)
Red (0-100%)
Green (0-100%)
Blue (0-100%)
OFF: Dimmer speed off
DIM1: Dimmer speed fast
DIM2: Dimmer speed middle
DIM3: Dimmer speed slow
Turns infrared on or off
9