Table of Contents
Advertisement
Fig. 2.6
Fig. 2.7
Power level
L1, L2 and L3
1
2
3
4
5
6
7
8
9
Power boost
Fig. 2.8
A & B linked
A
B
C, D & E linked
Maximum operating time
2 hours
6 hours
6 hours
5 hours
5 hours
4 hours
1.5 hours
1.5 hours
1.5 hours
1.5 hours
10 minutes
Table 2.2
D
C
E
Child Lock,
IMPORTANT: The child lock can only be activated
n
n
when all the cooking zones are switched off.
To prevent the unwanted use by children, the hob can be
locked.
To lock the hob, simultaneously turn the two left-hand
controls counter-clockwise (Fig. 2.6) and hold until the
symbol appears in the centre of the hob control display
(Fig. 2.7).
Note: [A] will flash when locking the hob – this is normal.
Locking the hob will NOT affect the oven; it can still be used.
To unlock the hob, simultaneously turn the two left-hand
controls counter-clockwise and hold until the
disappears from the centre of the hob control display.
Low Temperature Setting, L1/L2/L3
This function should only be used when heating
n
n
from cold
Each cooking area is equipped with 3 low temperature
settings:
• L1 will maintain a temperature of about 44 °C – ideal for
gently melting butter or chocolate.
• L2 will maintain a temperature of about 70 °C – ideal for
keeping food warm, once it has been cooked.
• L3 will maintain a temperature of about 94 °C – ideal for
simmering (bring the pan to the boil and then select L3
to keep soups, sauces, stews, etc at an optimal simmer).
The maximum time this setting can be used is 2 hours. To
increase the heat, just turn the control knob to the required
level. The maximum times for all other power levels are
shown in Table 2.2.
Power Boost Setting, P
All of the induction cooking zones have Power Boost
available, activated by turning the control knob clockwise
until [P ] is shown on the hob control display.
Power Boost allows additional power to be made available for
each of the cooking zones. This is useful to bring a large pan
of water to the boil quickly.
The Power Boost function operates for a maximum of 10
minutes on each zone, after which the power is automatically
reduced to setting 9.
When using the Power Boost function, the cooking zones are
linked.
Fig. 2.8 shows the hob layout. Zones A and B are linked
together as are zones C, D and E.
This means that when using zone A on Power Boost and then
switching zone B to Power Boost, the power to zone A will
reduce slightly. The last zone switched to power boost always
takes priority. Zones C, D and E work in the same way.
8
symbol
Advertisement
Table of Contents
