Bass
Loudness
Loudness Level
Room Correction
Room Correction (L) / (R)
Bass / Treble settings
*
These menu points are only displayed if the optional APM sound processor module is installed.
- 6 ... 0 ... + 8
off / on
- 10 ... 0 ... + 10
off / on
The purpose of this menu point is to call up the configuration menu for room
correction for the left / right channel.
The following set-up options are available:
same for L/R /
independent for L/R
This menu point is used to adjust the bass
settings.
This set-up option is used to switch loudness on
or off.
This menu point is used to adjust the loudness
level.
This menu point can be used to disable (by-
pass) the PA 3100 HV's room correction.
This menu point can be used to change the
method of controlling the tone settings. The
bass and treble values can be altered together,
if "same for L/R" is set. To alter the values
separately for each channel, "independent for
L/R" must be set.
47