Laversab 6300-M4 User Manual page 60

Command Type
PA R
RA R
SA R
PT=n R/W
RT=n R/W
ST=n R/W
PJ=n W
RJ=n W
SJ=n W
PU=n R/W
SU=n R/W
PM=n R/W
SM=n R/W
ER R
Description
Actual pitot value in current units
Actual climb/ Ps rate value in current units
Actual static value in current units
Read/ Set Pt target value
Read/ Set climb/Ps rate target value
Read/ Set Ps target value
Jog up (n=0) or down (n=1) Pt target
Jog up (n=0) or down (n=1) rate target
Jog up (n=0) or down (n=1) Ps target
Read/ Set Pt units as per following:
n units
1 knots
2 mach
3 Pt inHg
4 Qc inHg
5 Pt mb
6 Qc mb
7 mph
8 kmph
9 EPR
Read/ set Ps units as follows:
n units
1 Feet
2 Ps inHg
3 meters
4 Ps mb
Read/Set Pt mode to Measure (1), Leak (2), control (3)
Read/set Ps mode to Measure (1), Leak (2), Control (3)
Read current error ; 0 if no error
53