Table of Contents
Advertisement
Units:
Actual:
Target:
The Main operating screen will be used almost all the time during normal operation for
commanding target values, viewing actual values, setting units and modes.
Error Messages:
occur. The errors are displayed on the last (4
Units:
Actual:
Target:
Error 5: Pitot target exceeds limits
Profile Execution:
indicate the profile number and the point in the profile. A sample screen is shown below,
where point number 12 of profile number 3 is being executed. Notice that this sample screen
shows some of the values to be different from our previous sample screens. The essence of
using profiles is that all the 7 parameters can be changed simply by moving to the next point
in the profile, eliminating the need to perform a lot of data entry.
Units:
Actual:
Target:
Executing Profile 3.12 Lear-55 ADC
For more information on profiles, please refer to Section 4.
knots
M
101.2
20.0
The Main screen is also used to display error conditions as they
th
knots
M
101.2
20.0
When a "profile" is being executed, the 4
knots
C
101.2
200.0
18
Static half
Feet/min
Feet
3500
1005
3000
) line of the display, as shown below.
Feet/min
Feet
3500
1005
3000
Feet/min
Feet
3500
1005
6000
5000
M
0
M
0
th
line of the display will
C
Advertisement
Table of Contents
