Table of Contents
Advertisement
Cleaning the CloudCore™ spray plate (Mira Maxim ONLY)
1
Insert the spray plate removal tool into
the corresponding feature in the core
sprayplate.
2
Hold the deluge showerhead with
one hand and turn the removal tool
anticlockwise to unscrew the core
sprayplate from the showerhead.
Note: There may be some residual
water in core spray plate.
3
Clean the core spray plate silver mesh
with mild washing up detergent or soap
solution, rinse under water and wipe
using a soft cloth or brush.
4
Replace with alternative or cleaned
CloudCore™ or RainCore™ spray plate.
Inser t the spray plate tool into the
corresponding feature and turn clockwise
to tighten.
65
Advertisement
Table of Contents
