Mira Mode 1.1980.001 Installation And User Manual page 14

Digital shower / bathfiller
Table of Contents

Advertisement

Flow Rates
Nominal Flow Rate
Mira Digital Mixing Valve Pumped/Gravity (not suitable for mains pressure systems)
Caution! The pump in this product is not suitable for dry running. It is essential you
follow the commissioning sequence detailed in this guide.
Pressures
Thermostatic Standard
Maximum Static Pressure
Maximum Maintained Pressure
Minimum Maintained Pressure
Supply Pressure Differential
Temperatures
Maximum Temperature (setting range)
Minimum Temperature
Hot Water Range - Supply
Cold Water Range - Supply
Temperature Stability at Valve Outlet
Ambient Temperature
Maximum Relative Humidity
Flow Rates
Nominal Flow Rate
Default flow rate - 12 L/min for showering
products, 16 L/min for bath filler products.
The Digital Valve can deliver 16 L/min maximum
flow at 1 bar.
Switch Handset products can deliver 10 L/min at
1 bar (with flow reg removed).
Deluge Overhead products can deliver 16 L/min
at 1 bar.
All pressures refer to maintained pressure at
valve inlets*.
TMV 2 - LP-S (BS EN 1287 Type 2)
100 kPa (1 bar) 10m head
100 kPa (1 bar) 10m head
1 kPa (0.01 bar) 0.10m
Nominally equal
30°C - 48°C (Factory Preset 45°C)
Thermostatic control down to 30°C
Full Cold also selectable
55°C - 65°C
1°C - 20°C
± 1°C at recommended supply conditions
1°C - 50°C
95% non-condensing at 30°C
Default flow rate - 12 L/min for showering
products, 16 L/min for bath filler products.
The Single Outlet Digital Valve can deliver
12 L/min maximum flow at 0.1 bar.
The Dual Outlet/Bath Filler Digital Valve can
deliver 16 L/min maximum flow at 0.1 bar.
Switch Handset products can deliver 10 L/min at
0.1 bar (with flow reg removed).
Deluge Overhead products can deliver 12 L/min
at 0.1 bar.
All pressures refer to maintained pressure at
valve inlets*.
14

Advertisement

Table of Contents
loading

Table of Contents