Table of Contents
Advertisement
19. The maximum mixed water temperature from the product is
48°C to take into account losses in metal baths. It is not a safe
bathing or showering temperature.
20. Always check the water temperature is safe before bathing or
showering.
21. DO NOT remotely operate or alter any of this product's shower
and bathing settings if it is already occupied and / or being used
by another person.
22. DO NOT use excessive force when making connections.
23. Avoid layouts where the shower hose will be sharply kinked.
This may reduce the life of the hose.
24. The position of the shower fittings must provide a minimum air
gap of 25mm between the handshower and the spill over level of
any bath, shower tray or basin. There must be a minimum
distance of 30mm between the handshower and the spill over
level of any toilet, bidet or other appliance with a Fluid Category
5 backflow risk.
25. DO NOT operate the valve at voltages other than that stated on
the rating label.
26. This appliance is only to be used and supplied at SELV (Safety
Extra Low Voltage) using only the supplied detachable power supply
unit.
27. The supply cord of the power supply unit cannot be replaced. If
the cord is damaged the power supply must be replaced.
28. In the event of a cold water failure, the product is designed to
reduce the flow. Depending on the temperature of the hot water,
the valve may shut down to prevent scalding.
5
Advertisement
Table of Contents
