Table of Contents
Advertisement
5
Indicate Flow.
Wait for water to flow from the end of the hose or bath filler, then step on by pressing
and holding the flashing button for 3 seconds. The product may step itself on if your
water pressure is sufficient.
6
Pump Commissioning.
The product will then commission the pump, indicated by top (C) to bottom (D) flashing.
Wait for this to be completed. A noisy pump is indicative of a lack of water – this may
suggest supply issues. The product will indicate the process is complete by stopping
flashing (E).
C
7
Failed Commissioning.
If commissioning has failed, the product will return to left (a) to right (B) flashing.
Review the installation and retry.
8
Flush the second outlet for 10 seconds (Overhead or Bath fill). Once complete, fit
and secure the fittings as per instructions in the fittings section.
51
3 Seconds
D
A
B
E
Advertisement
Table of Contents
