Mira Mode 1.1980.001 Installation And User Manual page 37

12
Secure the assembly in position
with the screws using a 2.5mm
hex key. The top securing screw
tightens clockwise, the bottom
one anti - c lock wise. DO NOT
overtighten.
14
Fit the shower hose to the handset. Make sure that you fit the washer into shower
hose.
13
Fit the cap to the top of the slide bar
and fit the hose to the bottom outlet.
Make sure that you fit the washer
into shower hose.
Note: DO NOT fit the handshower
until after pipework has been
fully flushed through. Refer to
'Commissioning'. See page 46
for high pressure product, page
49 for pumped product.
Washer
Cap
Washer
37