Set The Scsi Id - Tandberg Data SuperLoader Quick Start Manual

Hide thumbs Also See for SuperLoader:

Set the SCSI ID

Each SCSI device that is attached to a

server or workstation must have a unique

SCSI ID. The SuperLoader is set to a

default SCSI ID of 5. Use the front panel

or Web Administration to change the SCSI

ID if necessary.

For details about setting the SCSI ID,

see the User Manual.

Set the

Ethernet

Ethernet is the method that the

autoloader uses to access a network.

The Ethernet connection is how you

access the Web Administration to

modify the SuperLoader configura-

tions, such as the IP address. Each

Ethernet device must have a unique IP

address.

Use the front panel to determine and

modify the static IP address or set the

SuperLoader to a dynamic address.

If you are not using a dynamic address,

you must set the IP address and

Subnet mask.

For more details, see the User

Manual.

Do you have a question about the SuperLoader and is the answer not in the manual?