Quick start guide for MERUS™ evaluation boards
EVAL_AUDIO_MA12070_B and EVAL_AUDIO_MA12070P_B
Quick start
Figure 9
MA120xx control software interface
If the connection is successful it will be indicated in the ID status line, as shown in
7.
Figure 10
Control interface indicating successful communication with the board
Press "I2S setup" to set up the I
8.
follow the same parameters as the source, as shown in
Figure 11
I
S configuration screen
2
User manual
2
S settings and the audio processor parameters. Note that they should
10
Figure
11.
Figure
10.
V 1.0
2023-06-07