Quick Start; Default Configuration - Infineon MERUS EVAL AUDIO MA12070 B Quick Start Manual

Quick start guide for MERUS™ evaluation boards
EVAL_AUDIO_MA12070_B and EVAL_AUDIO_MA12070P_B

Quick start

2 Quick start
This chapter describes how to configure, power and start up the board for quick evaluation.
2.1

Default configuration

First, verify that the board jumpers are in the default position. Note that some MA12070P jumper locations are
different from the MA12070, and these are marked in orange in
Figure 2 Jumper settings for MA12070 and MA12070P
Figure 3 shows the default audio input and speaker output configuration for the MA12070 or the MA12070P
that is used for this quick start guide.
User manual
Figure 2.
7 V 1.0
2023-06-07