Section 4: Interpreting The Duplicator's Led Status Lights; Power Led; Pause Led - Primera Max User Manual

TOC
Section 4: Interpreting the Duplicator's
The LED Status Lights
They can tell you a lot about what is happening at any given
moment with the Duplicator, including a number of error
conditions. To accurately interpret what is meant when the
lights are on, off, or flashing, please refer to the following chart:
A. POWER LED
Status
Off
On Solid
Flashing
B. PAUSE LED
Status
Off
On Solid
Flashing
LED Status Lights
are located on the
Condition
No Power. Plug in Power Adapter.
Power is ON. This is the Duplicator's normal
"waiting" mode.
Power is ON, but an error condition exists:
a. Didn't pick up a disc
b. Dropped a disc
c. Discs out
d. Robotic arm stalled; probably hit
something while moving. Press any button
on Control Panel to re-try.
Condition
Normal "waiting" mode
Duplicator is paused.
Duplicator is busy; i.e. motors are running,
printer is printing, etc.
Interpreting the Duplicator's LED Status Lights 31
INDEX
front Control Panel.

Power LED

Pause LED