Output Bin - Primera Max User Manual

Optical disc duplicator
Hide thumbs Also See for Max:
Table of Contents

Advertisement

TOC
NOTE: Only the CD version of duplicators can print and record
simultaneously. To ensure proper recording, the robotics may pause
momentarily when the CD Recorder drives are initializing. This
pause is normal. The robotics will continue operating after a short
pause. The DVD version does not allow you to print and record
simultaneously.
8. While the first disc is printing, the Robotic Arm moves the
second disc from the cd recorder to the
temporarily. This acts as a holding area to allow
simultaneous recording and printing.
9. The Robotic Arm will now load both drives with blank
CD-Rs from the input bin to start recording the next round.
10. The recorded disc in the output bin will now be
temporarily moved to the input bin.
11. Print time varies according to which printer has been
selected. Both
In most cases, print time takes no more than 1 minute.
After printing the first disc, the printer's CD Tray opens
automatically. The Robotic Arm transports the finished
CD-R to the Output Bin.
12. The Robotic Arm will then pick the recorded disc from the
Input Bin
arm will then deposit the finished disc into the
13. The process starts over and repeats until all blank discs are
gone or the number you have specified via software are
copied and printed.
Now that you understand the principle and the order of
operation, it is time to set up your Duplicator. This is
discussed in the next several sections.
ink-jet and thermal printers
and load it into the printer. Once printed, the
INDEX

Output Bin

are available.
Output
Bin.
Getting Started 9

Advertisement

Table of Contents
loading

This manual is also suitable for:

ProXl

Table of Contents