TOC
7. Connect the
optional Printer Stand) to the
rear panel of the Duplicator. Do not connect the other end
yet. You need to attach the
printer first.
8. Attach the optional printer stand (required for a printer
installation) to the Duplicator by locating the connecting
tabs and inserting them into the slots on the rear panel of
the Duplicator. For the
attached so that it is on the left side of the Duplicator.
12 Hardware and Software Set-Up and Testing
6-pin mini-DIN cable
Printer Stand
Ink-Jet CD
2
1
INDEX
(included with the
Printer Control Port
and mount the
Printer, the stand is
on the