Primera Max User Manual page 18

TOC
9. Connect the other end of the
Printer Control Port
10. Connect the printer with an IEEE 1284 compliant
cable.
panel of the printer. The other end is connected to the
parallel port of your PC. Make sure that your PC's parallel
port is set to
this or how to change it, refer to set-up section of the
printer's Operator's Manual.
11. Make sure that all cables are routed neatly underneath and
out the back of the
underneath the Duplicator or printer stand feet.
14 Hardware and Software Set-Up and Testing
on the rear panel of the printer.
One end is connected to the parallel port on the rear
ECP mode. If you don't know how to check
printer stand
INDEX
6-pin mini-DIN cable
and that no cables are
to the
parallel