Table of Contents
Advertisement
TOC
D. PRINTING A
Now that the printer is set up and print supplies are loaded, a
self test should be performed to check for proper operation of
the printer. A sample of the self test print is shown below.
Refer to the following steps to run a self test:
1. If power is ON, turn it OFF now using the Power button.
The Power light should be OFF. Verify that print supplies
are installed and that the CD Tray is closed.
2. With the printer's front cover shut, press and hold the
3. Continue to hold the
seconds, until you hear the self test begin to print.
SELF TEST
CD Tray button as you turn the printer power ON.
INDEX
CD Tray button down for a few
Ink Cartridges and Printable CDs 7
Advertisement
Table of Contents
