Table of Contents
Advertisement
TOC
B. 6-PIN MINICIRCULAR
The 6-pin minicircular auxiliary interface is used for connecting
the printer with auxiliary equipment such as a CD transporter/
auto-loader.
Pin assignments are as follows:
Uses 5v logic @ 5mA
Pin Number
1
2
3
4
5
6
TABLE A-1: Auxiliary Interface Pin Assignments
NOTE: Pins 1-4 are low if the printer is plugged in but the power has been
turned off using the printer's Power Button
AUXILIARY INTERFACE
6
5
4
3
2
1
Signal Description
Busy - Output is high when the printer is busy
or moving the CD Tray.
Tray Out - Output is high when the CD Tray
is fully ejected.
Tray In - Output is high when the CD Tray is
fully inserted.
CD In - Output is high when the CD Tray is in
and a CD is present.
Ground.
Tray In/Out - A low input moves the CD Tray
in if it is out, and out if it is in.
INDEX
Interfacing Information 31
Advertisement
Table of Contents
