About This Manual - Simrad MS70 Installation Manual

About this manual

About this manual
The purpose of this manual is to present the descriptions and drawings required to install the
Simrad MS70 Multibeam scientific sonar.
Target audience
The manual is intended for technical personnel; such as skilled shipyard workers,
electricians, qualified engineers and naval architects. It is assumed that you understand
the general principles of maritime electronic equipment. You must also be familiar with
computer hardware, interface technology and installation of electronic and mechanical
products.
Installation instructions
The instructions provided in this manual must be followed carefully to ensure optimal
performance. As a guide, installation procedures are presented in the order they must be
done.
The equipment described in this manual includes the complete system with relevant
cabinets. Units provided locally by the customer, installation shipyard or local representative
are not described.
Note
Kongsberg Maritime AS will accept no responsibility for any damage or injury to the system,
vessel or personnel caused by equipment that has been incorrectly installed or maintained,
or by drawings, instructions or procedures that have not been prepared by us.
Installation drawings
The installation shipyard must provide all necessary design and installation drawings, as
well as the relevant work standards and mounting procedures. The installation shipyard must
design and manufacture relevant installation hardware to fit each individual hardware unit.
11
331549/C