Safety Information - Martin RUSH MH-2 Wash User Manual

Safety information

Read the safety precautions in this manual before installing,
The following symbols are used to identify important safety information on the
product and in this manual:
Warning!
Safety hazard.
Risk of severe
injury or death.
Avoid looking directly into the LED light source beam and do not
view the light output with optical instruments or any device that
may concentrate the beam.
This product presents risks of severe injury or death due to fire
hazards, electric shock and falls.
Read this manual before installing, powering or servicing the
fixture, follow the safety precautions listed below and observe all
warnings in this manual and printed on the fixture. If you have
questions about how to operate the fixture safely, please contact
your Martin™ dealer or call the Martin 24-hour service hotline at
+45 70 200 201.
Please keep this document for future consultation.
Protection from electric shock
Always shut down power to the fixture before carrying out any
installation or maintenance work.
Disconnect the fixture from AC power before removing or
installing any cover or part and when not in use.
Always ground (earth) the fixture electrically.
Use only a source of AC power that complies with local building
and electrical codes and has both overload and ground-fault
powering, operating or servicing this product.
Warning!
LED light
emission. Risk of
eye injury.
RUSH MH-2 Wash user manual
WARNING!
Warning!
Refer to manual
before installing,
powering or
servicing.
Warning!
Hazardous Hot surfaces and
voltage. Risk of
lethal or severe
electric shock.
Warning!
fire hazard.
5