Super X13SRN-H/-E User's Manual
SO-DIMM Installation
1. Position the SO-DIMM module's bottom key so it aligns with the receptive point on the
slot.
2. Insert the SO-DIMM module vertically at about a 45-degree angle. Press down until the
module locks into place.
Insertthisendfirst
3. The side clips automatically secure the SO-DIMM module, locking it into place.
Locking clip
SO-DIMM Removal
1. Push the side clips at the end of slot to release the SO-DIMM module. Pull the SO-
DIMM module up to remove it from the slot.
Align
Press down until the module
locks into place.
30