Table of Contents
Advertisement
2.2 Motherboard Installation
All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Tools Needed
Phillips
Screwdriver
(1)
MH1
JHDMI1
FAN1
JPW1
JPT1
COM1/COM2
MH3
Location of Mounting Holes
Note 1: To avoid damaging the motherboard and its components, do not use a force
greater than 8 lbf-in on each mounting screw during motherboard installation.
Note 2: Some components are very close to the mounting holes. Take precautionary
measures to avoid damaging these components when installing the motherboard to
the chassis.
Phillips Screws
(4)
JHDMI2
USB6
USB4
USB7
USB5
SRW5
CPU
SRW1
P1_PE2 4-0
COM3/COM4
JPH1
27
Chapter 2: Installation
Standoffs(4)
Only if Needed
MH4
LAN2
LAN1
LED1
JF1
JSIM1_OPT
SRW2
USB8
USB0/1
SRW4
USB2/3
JSPKR1
I-SATA0
AUDIO FP
MH2
BT1
Advertisement
Table of Contents
