Sandstrom RETRO SPLDAB17 Instruction Manual page 43

Problem
The unit does not
respond when pressing
any button
Desired station not found
No coverage in your area
or poor reception
The display is blank
If any functional abnormality is encountered, unplug the unit from
the mains socket and reconnect it again.
Solution
• The unit may freeze up during use. Switch the unit off and then on
again at the mains socket to reset the unit.
• Weak signal. Use the Manual Tune function.
• Adjust the position of the aerial.
• This may occur if the broadcaster changes the label of a service or
removes a label while tuned. The unit will try to re-tune or perform a
scan.
43