10. Firmware Upgrade Utility
Initiating the Firmware Upgrade
1. Run the downloaded Firmware Upgrade Package file by double clicking the file icon or using a command line to enter
the full path. The Firmware Upgrade Utility Welcome screen will appear.
2. Read the License Agreement and enable the I Agree radio button.
3. Click Next. The Firmware Upgrade Utility main screen appears. The Utility inspects your installation. All the devices
capable of being upgraded by the package are listed in the Device List panel.
4. As you select a device in the list, its description appears in the Device Description panel. Once you have made your
device selection(s), click Next to perform the upgrade.
If you enabled Check Firmware Version, the Utility compares the device's firmware level with that of the upgrade files.
If the device's version is higher than the upgrade version, a dialog box gives you the option to Continue or Cancel.
If you didn't enable Check Firmware Version, the Utility installs the upgrade files without checking whether or not they
are a higher level.
18