Ford Focus 2004 Owner's Manual
  1. Manuals
  2. Brands
  3. Ford Manuals
  4. Automobile
  5. 2004 Focus
  6. Owner's manual

Ford Focus 2004 Owner's Manual

Hide thumbs Also See for Focus 2004:
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Focus 2004 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Ford Focus 2004

Summary of Contents for Ford Focus 2004

  • Page 2 Ford Motor Company of Southern Africa. The same also applies for parts of this manual and their use in other publications.

  • Page 3: Table Of Contents

    Contents Introduction Preface Safety and environment protection Running in Instrumentation Warning and indicator lights Gauges Vehicle information systems Message centre Climate Controls Heating and ventilation Air conditioning Heated rear screen Lights Headlights Headlight levelling Direction indicators Interior lights Driver Controls Steering wheel adjustment Screen wiper/washer controls Automatic speed control...
  • Page 4 Contents Locks (security) Keys Locks Anti-theft alarm system Seating and Safety Restraints Seating Safety restraints Air bag Child restraints Driving Brakes Electronic Stability Program (ESP) Steering Starting Gearbox Vehicle loading Trailer towing Roadside Emergencies Hazard flasher switch Fuel injection system shut-off switch Fuses and relays Bulb replacements Changing a wheel...
  • Page 5 Contents Maintenance Opening the bonnet Engine compartment Engine oil Brake/clutch fluid Coolant Power steering fluid Battery Washer fluid Tyre information Capacities and specifications Identification numbers Fuel information Engine data Engine oil Vehicle fluids Vehicle weights Vehicle dimensions Tyres Accessories Index...

  • Page 6: Introduction

    Introduction PREFACE Congratulations on acquiring your new Regular servicing of your vehicle helps Ford. Please take the time to get well maintain both its roadworthiness and acquainted with your vehicle by reading its resale value. A network of Ford this handbook. The more you know and...

  • Page 7: Safety And Environment Protection

    Introduction FOR YOUR SAFETY AND Protecting the environment ENVIRONMENT PROTECTION We must all play our part in protecting the environment. Correct Warning symbols in vehicle usage and the this guide authorised disposal of waste cleaning and lubrication materials are significant How can you reduce steps towards this aim.
  • Page 8 Introduction Protection features for safer Safety from electronics driving For your safety your vehicle is fitted with The risk of injury from traffic accidents sophisticated electronic controls. can never be completely eliminated, but it can be reduced with the aid of modern By operating other electronic technology.

  • Page 9: Running In

    Avoid using high engine speeds. You will then protect your engine, reduce fuel consumption, lower the engine noise level and help to reduce the environmental burden. We wish you safe and pleasurable driving with your Ford vehicle.

  • Page 10: Instrumentation

    Instrumentation...
  • Page 11 Instrumentation Description See page Exterior lights switch, front fog lights. 46 - 47 Headlight levelling control Multi- function lever: direction indicators, 17- 49 main beam, message centre 10 - 11 Instrument cluster Horn Wiper lever 53 - 54 Ventilation vents Hazard flasher switch –...

  • Page 12: Warning And Indicator Lights

    Instrumentation WARNING AND INDICATOR LIGHT Position Symbol Function See page Belt minder warning light Headlight indicator light Air bag / seat belt pretensioner warning light 103 - 104 Oil pressure warning light Direction indicator light 80 - 81 Engine immobilisation system ABS warning light Depending on the equipment fitted, the position of the indicator light may vary...
  • Page 13 Instrumentation Position Symbol Description See page Low fuel level warning light 136 - 139 Main beam indicator light ESP indicator light 118 - 119 Engine warning light Glow plug indicator light Automatic speed control indicator light Doors open warning light Brake system warning light 114,116, 200 Maximum engine RPM light...
  • Page 14 ■ Engine systems fault. ■ Power assisted steering ■ Ignition. If a warning or indicator light does not illuminate when the ignition is switched on, it indicates a malfunction. Have the system checked by an expert. Ford authorized repairers are recommended.

  • Page 15: Gauges

    Instrumentation GAUGES Fuel gauge The amount of fuel required to fill Tachometer the tank up may be less than the On vehicles with a diesel engine, specified tank capacity, as a small the tachometer goes to amount of fuel always remains in 6 000 revolutions per minute.
  • Page 16 Instrumentation Vehicles without a Message Centre Odometer Registers the total mileage of the vehicle. Tripmeter The tripmeter can register the mileage of individual journeys. To reset, press the button. Odometer Tripmeter Reset button Vehicles with a Message Centre Note: The odometer and tripmeter are incorporated into the Message Centre.
  • Page 17 Instrumentation Vehicle with automatic transmissions Malfunction display If your vehicle is equipped with an automatic transmission, the following information will be shown in the display: • The current selector lever position – P (Park), R (Reverse), N (Neutral) or D (Drive). •...

  • Page 18: Vehicle Information Systems

    Vehicle information systems MESSAGE CENTRE The Message Centre provides the driver with a variety of information about the vehicle. The driver is able to programmme various systems using the Message Centre and the multi-function lever on the steering column. The Message Centre also provides warning messages about faults or system malfunctions.
  • Page 19 Vehicle information systems Overview of the Main Menu displays Use the rotary control to scroll through the displays and press SET/RESET to choose a sub-menu and/or adjust the settings. Tripmeter/Odometer 1069.8 see page 19 123456 KM Scroll DISTANCE TO Distance to empty EMPTY: 625 KM see page 19 Scroll...
  • Page 20 Vehicle information systems Main menu 1069.8 11°C Odometer 123456 KM Registers the total mileage of the vehicle. 11°C 1069.8 Tripmeter 123456 KM The tripmeter can register the mileage of individual journeys. To reset, press 11°C 0000.0 the SET/RESET button. 123456 KM Distance to empty Indicates the approximate distance the DISTANCE TO...
  • Page 21 Vehicle information systems Average speed AVERAGE SPEED Indicates the average speed calculated 100 KM/H over the last 1000 km or since last reset. Press the SET/RESET button to set to AVERAGE SPEED zero. – – – KM/H Outside air temperature Shows the outside air temperature.
  • Page 22 Vehicle information systems Warning messages LOW OUTSIDE When a warning message appears in TEMPERATURE the display, the driver must acknowledge it by pressing the SET/RESET button. Once the SET/RESET button has been pressed, the display will return to the one previously shown.
  • Page 23 Stap the vehicle as soon as safely possible and switch off the engine • HIGH ENGINE TEMPERTURE immediately. Have the engine checked by an expert. Ford authorised repairers are recommended. Indicates that the engine may be overheating. • BRAKE LIGHT FAULT...
  • Page 24 Have the system checked to a maximum of 56km/h. Pressing by an expert, Ford authorized repairers the brake pedal will reduce the engine are recommended. For further details, speed back down to idle.
  • Page 25 Full steering will be maintained but you will need to exert greater force on the steering wheel. Have the system checked by an expert. Ford authorized repairers are recommened. • TRANSMISION MALFUNCTION Indicates a malfunction of the automatic transmission.
  • Page 26 • FUEL COMPUTER DATA ERROR There is a malfunction of the fuel computer. Have the system checked by an expert. Ford authorized repairers are recommended. • ODOMETER DATA ERROR There is a malfunction of the odometer. Have the system checked by an expert.
  • Page 27 Vehicle information systems Your Settings Menu To enter the Your Settings Menu, YOUR SETTINGS - - scroll to this display using the rotary - SET/PRESET control and press the SET/RESET button. The following sub-menus are available in the Your Settings Menu: Vehicle setup •...
  • Page 28 Vehicle information systems Overview of the Your Settings Menu displays Use the rotary control to scroll through the displays and press SET/RESET to choose a sub-menu and/or adjust the settings. YOUR SETTINGS Set/Reset - - - - SET/RESET Vehicle setup VEHICLE SETUP See page 28 STANDARD...
  • Page 29 Vehicle information systems Vehicle setup menu The steering characteristics on VEHICLE SETUP vehicles with electro-hydraulic STANDARD ~ steering can be adjusted t o suit your personal preferences and driving style. The system is delivered with a preset standard setting. The following settings options are available: •...
  • Page 30 Vehicle information systems Use th e rotary control to scroll through t he settings opt ions within the menu and press SET/RESET to select the desired setting. A tick ( ✔ ) appears in the display of the setting which is se lected. The fol lowing vehicle set ups/ options are available : STANDARD...
  • Page 31 Vehicle information systems Saving the settings (If equipped) Note: The settings will remain set for one ignition cycle only. When the ignition is switched off and back on, the settings for the steering will return to standard. The settings can be permanently saved to an ignition key.
  • Page 32 Vehicle information systems Language setting (if equipped) LANGUAGE ENGLISH (UK) A choice of eleven languages is available. To choose the desired language, scroll to this menu using the rotary control. Select the languages by pressing the SET/RESET button and exit the menu using the rotary control to save the selection.
  • Page 33 Vehicle information systems Chime deactivation The following chimes can be deactivated: • Exterior lights on when the driver’s door is opened. • SET/RESET button press. • Warning messages with an amber warning light and warning messages without a warning light. MESSAGE CHIMES A tick ( ✔...

  • Page 34: Climate Controls

    Climate controls HEATING, VENTILATION AND Heating AIR CONDITIONING The temperature can be adjusted. Outside air Note: The heating depends upon Always keep the air intakes free of the coolant temperature and is snow, leaves etc., to allow the therefore only effective when the system to function effectively.
  • Page 35 Climate controls General notes on controlling the Centre and side vents climate in the vehicle’s interior Close all the windows completely. To warm the interior effectively, the heated air should be directed to the footwell area. As this may cause the windows to mist up in cold or humid weather, some of the air should be directed towards the...
  • Page 36 Climate controls Air distribution control Directs the air flow as follows: Front screen Footwell/front screen /rear air vents Footwell /rear air vents Face level/footwell /rear air vents Face level /rear air vents Face level/front screen /rear air vents Mix positions The air distribution control can be set to any position between the symbols for finer control.
  • Page 37 Climate controls Ventilation Set the air distribution control to the position or the position. Set the blower to any position. Open the centre and side vents to suit individual requirements. Rapid front screen defrosting/ demisting This automatically turns off the recirculation function.
  • Page 38 Climate controls Cooling with outside air Rapid cooling of the vehicle interior Front screen defrosting/ demisting Set the air distribution control to . Outside air will flow into the vehicle. As long as the air distribution control is set to , the air conditioning will be turned on automatically after one second.
  • Page 39 Climate controls DUAL AUTOMATIC TEMPERATURE CONTROL The Dual Automatic Temperature Control maintains the selected interior temperature automatically. The temperature, amount and distribution of the air flow are controlled automatically and adjusted according to the driving and weather conditions. Pressing the AUTO button once switches on the AUTO mode.
  • Page 40 Climate controls For the system to function properly, the side and centre vents should be fully open. The sensor which measures the interior temperature is located in the centre of the heater control panel. The sunload sensor is located on top of the instrument panel.
  • Page 41 Vehicle information systems Main menu 1069.8 11°C Odometer 123456 KM Registers the total mileage of the vehicle. 11°C 1069.8 Tripmeter 123456 KM The tripmeter can register the mileage of individual journeys. To reset, press 11°C 0000.0 the SET/RESET button. 123456 KM Distance to empty Indicates the approximate distance the DISTANCE TO...
  • Page 42 Stop the vehicle as soon as safely possible and switch off the engine • HIGH ENGINE TEMPERTURE immediately. Have the engine checked by an expert. Ford authorised repairers Indicates that the engine may be are recommended. overheating. • BRAKE LIGHT FAULT Stop the vehicle as soon as safe to do so.
  • Page 43 • FUEL COMPUTER DATA ERROR There is a malfunction of the fuel computer. Have the system checked by an expert. Ford authorized repairers are recommended. • ODOMETER DATA ERROR There is a malfunction of the odometer. Have the system checked by an expert.
  • Page 44 Climate controls For the system to function properly, the side and centre vents should be fully open. The sensor which measures the interior temperature is located in the centre of the heater control panel. The sunload sensor is located on top of the instrument panel.
  • Page 45 Climate controls Mono mode In AUTO mode, the temperature settings for both the driver’s and passenger’s side are linked. If the temperature is adjusted using the buttons on the driver’s side, the settings will also be adjusted to the same setting on the passenger’s side.
  • Page 46 Climate controls To toggle Mono mode on and off To toggle MONO mode on and off, press and hold the AUTO button for at least two seconds. If the system was in MONO mode, MONO will extinguish from the display. The driver and passenger side temperatures can now be adjusted independently of one another.
  • Page 47 Climate controls Blower Press the button to reduce blower speed. Press the button to increase blower speed. The blower setting is indicated in the right-hand display. To return to AUTO mode, press the AUTO button. Air distribution To adjust air distribution, press the desired button.
  • Page 48 Climate controls Front screen defrosting/ demisting Set the air distribution control to Outside air will flow into the vehicle. Air conditioning is automatically selected. As long as the air distribution is set to , recirculated air cannot be selected. The blower speed and the temperature control operate automatically and cannot be adjusted manually.
  • Page 49 Climate controls Recirculated air Press the recirculated air control to toggle between outside air and recirculated air. The indicator light in the button illuminates during operation. Automatic recirculated air control When the system is in AUTO mode and the interior and exterior temperatures are quite hot, the climate control system automatically selects the...

  • Page 50: Heated Rear Screen

    Climate controls HEATED REAR SCREEN Use for quick defrosting or demisting of the rear screen. It should be switched on only if necessary. Heated rear screen switch Switch on the ignition first. Press the switch to turn on or off. The light in the switch indicates operation.

  • Page 51: Lights

    Lights EXTERIOR LIGHTS Exterior lights switch A warning chime will sound if the driver’s door is opened with the exterior lights switched on and the ignition switched off. Lights off Side and tail lights Headlights Headlight indicator light Illuminates when the headlights are on dipped beam or when the side and tail lights are on.
  • Page 52 Lights Front fog lights Switch on the headlights (position ) and pull out the control switch one position. The indicator light will illuminate when the front fog lights are in use. The front fog lights should be used only when visibility is considerably restricted by fog, snow or rain.

  • Page 53: Headlight Levelling

    Lights Headlight levelling control (if equipped) The level of the headlight beams can be adjusted according to the vehicle load. Without headlight levelling With headlight levelling Recommended headlight levelling control positions Load Control positions Load in Persons luggage 4/5-door compartment Front seats Rear seats –...

  • Page 54: Direction Indicators

    Lights Instrument lighting dimmer Multi-function lever Direction indicator When changing lanes, briefly tap the lever up or down and the direction indicators will flash three times. Direction indicator light A sudden increase in the rate of flashing warns of a failed indicator bulb.

  • Page 55: Interior Lights

    Lights INTERIOR LIGHTS Door contact The interior light switch has three positions: off, door activated, on. On some models, with the switch in the door activated position, the interior lights will stay on for a while after the ignition is turned on or the doors are shut.
  • Page 56 Lights Reading lights (If equipped) Vanity mirror lights Off.

  • Page 57: Driver Controls

    Driver controls STEERING WHEEL ADJUSTMENT Never adjust the steering wheel when the vehicle is moving. Release the locking lever to adjust the height of the steering wheel and its distance from the driver. Return the lever to its original position to secure the wheel. For further details on sitting in the correct position, refer to the section Seats on page 85.

  • Page 58: Screen Wiper/Washer Controls

    Driver controls SCREEN WIPER/WASHER CONTROLS The following functions will operate only with the ignition switched on. Front screen Lever positions: 1 = Single wipe 2 = Intermittent wiping 3 = Normal wiping 4 = High speed wiping Intermittent wiping (if equipped) Position 2 The rotary switch can be used to adjust the intermittent wiping...
  • Page 59 Driver controls Rear screen Intermittent wiping Pull the lever towards the steering wheel. Reverse gear wipe If no normal rear wiper function is selected, but the front wipers are set to intermittent, normal or high speed operation, when reverse gear is selected, the rear wiper will follow the front wiper interval (at intermittent or normal speed).
  • Page 60 Driver controls AUDIO REMOTE CONTROL (If equipped) Select radio, CD or cassette mode on the radio. The following functions can be operated with the remote control: Volume Volume up: Press the top button on the back of the remote control. Volume down: Press the bottom button on the back of the remote control.
  • Page 61 Driver controls Memory seek or change CD • Briefly press the button on the side: In radio mode, this will locate the next pre-set radio station. In CD mode, it will select the next CD if a CD changer is fitted. Aborting a traffic message •...

  • Page 62: Automatic Speed Control

    Driver controls AUTOMATIC SPEED CONTROL (If equipped) The automatic speed control system should not be used in heavy traffic, on twisty roads or when the road surface is slippery. To switch on The automatic speed control system will not function until the vehicle is travelling at speeds above 40 km/h.
  • Page 63 Driver controls To store a speed Press the SET or switch. The set speed becomes the new stored speed. The indicator light in the instrument cluster will illuminate. To change speed Press the SET switch to accelerate. Press the switch to decelerate. The vehicle speed will change without the need to depress the accelerator pedal.

  • Page 64: Mirrors

    Driver controls MIRRORS Interior rear-view mirror To reduce glare when driving at night dip the mirror by adjusting the lever. Auto-dimming mirror (if equipped) The auto-dimming mirror automatically activates the dimming function when hit by glaring light from behind. The function is automatically reversed when reverse gear is selected.
  • Page 65 Driver controls Convex outside rear-view mirrors The rearward field of vision is increased to minimise blind spots at the rear corners of the vehicle. Objects seen in these mirrors will look smaller and appear further away than they actually are. Be careful not to overestimate the distance of the objects seen in the mirrors.

  • Page 66: Power Windows

    Driver controls POWER WINDOWS Global opening/global closing The power windows can also be operated with the ignition off Before operating the power via the global opening/global windows you should verify closing function. they are free of obstructions and Refer to sections Global opening ensure that children and / or pets are on page 73 and Global closing on not in the proximity of the windows...
  • Page 67 Driver controls Power windows All the windows can be operated by switches located on the door trim panel of the driver’s door. Driver’s door switches: To open: Press down the front of the switch. To close: Lift up the front of the switch.
  • Page 68 If the window does no close after the Careless closing of the third attempt, have it checked by an windows can override the expert. Ford authorized repairers are protection function and cause injuries. recommended. While the window is being closed for the third time, the anti-trap function is disabled.
  • Page 69 Driver controls Resetting the memory of the power windows After the battery has been disconnected from the vehicle it is necessary to reset the memory separately for each window: • Lift the switch until the window is fully closed. Hold the switch lifted for one more second.
  • Page 70 Driver controls OTHER CONTROLS Sunvisors The sun visors can be released from the retention clips and swivelled towards the side window. The mirror cover can be fold up. ASHTRAY To empty, pull out the complete ashtray.
  • Page 71 10 amperes. However, if the engine is not running, this will accelerate battery discharging. When connecting appliances, use only specified connectors from the Ford Accessory range or connectors suitable for use with SAE standard sockets. Audio system auxiliary input (AUX IN) socket...

  • Page 72: Locks (Security)

    Locks (security) KEYS In case of loss, replacement keys are available from Ford Dealers by stating the key number shown on the tag provided with the original keys. For further information, refer to section Engine immobilisation system, page 80. To ensure a trouble-free...

  • Page 73: Locks

    Locks (security) Opening/closing the key blade (Type 1) To open the key blade, press the button. To close, press the button and swivel the blade back into the container until it clicks. General notes on the radio frequency remote control For type approval of your remote control, refer to the table on page 222.
  • Page 74 Locks (security) LOCKS From outside All doors can be locked and unlocked from the outside with the key at the driver’s door. Press From inside (lock the door) When inside the vehicle, all doors can be locked and unlocked with the locking button on the driver’s door and unlocked using the door handle.
  • Page 75 Locks (security) Luggage compartment To open the luggage compartment, press the switch. The vehicle must be unlocked. Refer also to the sections Unlocking the vehicle , page 72 and Unlocking the tailgate, page 73. Closing the tailgate A recessed grip is incorporated inside the tailgate to facilitate closing.
  • Page 76 Locks (security) CENTRAL DOOR LOCKING SYSTEM The central locking system can be activated from the driver’s or front passenger’s door. It operates only when the front doors are closed. It is activated from the outside with the key or remote control, or from inside by depressing the locking button on the door handle.
  • Page 77 Locks (security) Unlocking the vehicle With the key: Turn the key in the driver’s or front passenger’s door to position 1. With the remote control: Press the button once. One long flash of the direction indicators confirms that all the doors, the tailgate and the fuel filler flap have been unlocked and that the anti-theft alarm system has...
  • Page 78 Locks (security) Unlocking the tailgate To unlock only the tailgate when the vehicle is locked, press the button twice within three seconds. Global opening To open all the windows press and hold the button for at least three seconds. Pressing either the or the button again stops the opening function.
  • Page 79 Locks (security) In order to re-programme the function, press and hold the buttons simultaneously for at least four seconds with the ignition switched off. The direction indicators will flash twice to indicate that the unlocking function has been successfully re-programmed. Pressing and holding both buttons simultaneously for at least four seconds again will change the...
  • Page 80 Locks (security) To activate double locking and arm the interior sensors: With the key: Turn the key in the driver’s door to position 2 twice within three seconds. With the remote control: Press the button twice within three seconds. The direction indicators will flash twice to confirm that double locking is activated and the anti-theft alarm system with interior sensors is...
  • Page 81 Locks (security) Key programming A maximum of eight keys with radio frequency remote control can be programmed (including the ones delivered with the vehicle). The keys must remain inside the vehicle during the programming procedure. Fasten the front seat belts and close all doors to ensure that conflicting chimes do not sound during programming.
  • Page 82 Locks (security) Replacing the remote control battery If the range of the transmitter in the key decreases gradually, the battery (type 3V CR 2032) should be replaced. This will be indicated by the message REMOTE KEY BATTERY LOW in the Message Centre display REMOTE KEY BATTERY LOW To replace the battery...
  • Page 83 Locks (security) • Remote control type 1 • Insert the screw driver into the opening at the front of the container and rotate it to open the container completely. Be careful not to lose the key ring. Remote control • Remote control type 2: •...
  • Page 84 Locks (security) Replacing the battery • Insert the screw driver into the opening marked with an arrow and carefully prise out the battery. Take care not to touch the battery contacts or the printed circuit board. Type 1 • Insert a new battery using a soft cloth and without touching the battery contact.
  • Page 85 Two coded keys are needed to code a new key. Should you lose one key, take all your keys to your Ford Dealer who will replace the lost key at your own cost and reprogramme it together with the remaining keys.
  • Page 86 Remove the key and try again. If the engine does not start, a system malfunction has occurred. Have the system checked by an expert immediately. Ford authorized repairers are recommended.

  • Page 87: Anti-Theft Alarm System

    Locks (security) ANTI-THEFT ALARM SYSTEM The system acts as a deterrent to unauthorised persons who attempt to open the doors, bonnet or luggage compartment or remove the radio. The system is armed as soon as the vehicle is locked. Automatic arming delay The 20 seconds arming delay begins when the bonnet, luggage compartment and all doors are...
  • Page 88 Locks (security) The anti - theft alarm system for the tailgate is deactivated if the tailgate is unlocked using the button on the remote control. After closure, the alarm is once again armed.
  • Page 89 Locks (security) ANTI-THEFT ALARM SYSTEM WITH INTERIOR SENSORS (if equipped) This system acts as a deterrent against unauthorised intrusion by sensing any movement within the vehicle. Arming The interior sensing alarm is armed together with the double locking system. This system functions correctly only if all windows are completely closed.

  • Page 90: Seating And Safety Restraints

    Seating and safety restraints SEATS max. 30 Sitting in the correct position The seats, head restraints, seat belts, and air bags all contribute to the protection of the occupants. Optimal use of these components will give you added protection if you observe the following points: •...

  • Page 91: Safety Restraints

    Seating and safety restraints Do not adjust the seats while the vehicle is moving. Moving the seats forwards or backwards After releasing the lever, rock the seat to ensure that the catch is securely engaged. Adjusting the lumbar support Adjusting the height of the driver’s seat Each pull or press on the lever will raise or lower the height by a small...
  • Page 92 Seating and safety restraints Adjusting the height of the electrically operated 6 way power driver’s seat Adjusting the angle of the seatback When the seats are slid fully forward the seatbacks can be fully reclined. Do not place any objects behind the seat which could prevent the engagement of the seat lock.
  • Page 93 Seating and safety restraints Head restraints Front head restraints Adjust the head restraints so that the top is level with the top of your head. To adjust the height, pull the head restraint up or press the locking button and push the head restraint down.
  • Page 94 Seating and safety restraints Folding the rear seatbacks forwards • Insert the seatbelt tongues into the retaining slots. Lower the head restraints. • Push the unlocking button on the seatback and fold the seatback forwards. • When returning the seatbacks to the upright position, ensure that they engage in their outer latches.
  • Page 95 Seating and safety restraints Folding the seat cushion and seatback forwards • Pull the loop between the seat cushion and seatback and fold the seat cushion forwards. • Insert the seatbelt tongues into the retaining slots. • Push down the rear head restraint(s) and fold the seatback(s) forwards.
  • Page 96 Seating and safety restraints SEAT BELTS Use seat belts/child restraints at all times. Never use a seat belt for more than one person. Ensure belts are not slack or twisted and are not obstructed. Avoid wearing thick and bulky clothing. For optimum protection the seat belts should fit tightly around the body.
  • Page 97 Seating and safety restraints Make sure that each seat belt uses the correct buckle. In order to ensure that the centre belt works properly, the rear seatback must be correctly engaged. Adjusting the height of the front seat belts The seat belt must not lie across the neck.
  • Page 98 Seating and safety restraints Pregnant Women Never wear just the lap strap of a lap/shoulder Pregnant women must wear diagonal seat belt and never sit on a correctly positioned seat the lap strap using just the belt; it is safer for mother and shoulder strap.
  • Page 99 Have the pretensioners serviced and disposed of by specially trained personnel only. Ford authorized repairers are recommended. The restraint system, with belt pretensioner in the front seat, helps to reduce the risk of serious injury in a major frontal impact.
  • Page 100 Seating and safety restraints Beltminder When the vehicle’s speed exceeds 20 km/h, the Beltminder warning light will illuminate and a chime will sound if the driver’s safety belt is unbuckled. The chime will stop after 10 minutes. The warning light will not go out until the driver has fastened his/her safety belt.
  • Page 101 Belts subjected to strain - as a result of an accident - should be renewed and the anchorages checked by an expert. Ford authorized repairers are recommended. For information about cleaning the seat belts, please refer to section...

  • Page 102: Air Bag

    Seating and safety restraints AIR BAG Air bags, in combination with a seat belt, can help reduce the risk of severe injuries in the event of a significant collision. The system The air bag system comprises the following: • single-stage inflatable nylon bags (air bags) with gas generators •...
  • Page 103 Seating and safety restraints Note: A loud bang will be heard when an air bag deploys and it is normal to see a cloud of harmless powdery residue. Front air bags Extreme Hazard! Do not use a child restraint on a seat protected by an operational air bag in front of it! There is a risk of death or serious...
  • Page 104 Seating and safety restraints Always wear the seat belt and keep sufficient distance between the driver and the steering wheel. Only when the seat belt is used properly, can it hold the body in a position which allows the air bag to achieve its optimum effect.
  • Page 105 Repairs to the steering wheel, steering column and air bag system should be carried out by properly trained technicians. Injuries may result if the air bag is triggered inadvertently. Your Ford Dealer has technicians who have been carefully trained to service your vehicle.
  • Page 106 The side air bags are not activated upon minor lateral collisions nor upon front or rear impacts. It is recommended to clean the seats with Ford cleaning products.
  • Page 107 Injuries may result if the side air bags are triggered inadvertently. Your Ford Dealer has technicians who have been specially trained to service your vehicle. Do not block, obstruct or cover the air bag because it may prevent proper deployment and increase your risk of injury.
  • Page 108 Have the system checked by an expert. Ford authorized repairers are recommended. The air bag system should be disposed of only by an expert. Ford authorized repairers are recommended.
  • Page 109 If the Air bag/seat belt pretensioner warning light in the instrument cluster illuminates continuously, it means there is a malfunction. Have the system checked by an expert. Ford authorized repairers are recommended. Refer also to the section Airbag/seat pretensioner warning light page 103.

  • Page 110: Child Restraints

    Seating and safety restraints CHILD RESTRAINTS The safest place for children of height 150 cm or under or aged 12 years or under is properly restrained in the rear seats. Extreme Hazard! Do not use a child restraint on a seat Baby safety seat protected by an operational air bag in front of it!
  • Page 111 A choice of ECE approved child in the rear seat – never in the front. seats is available at your Ford Dealer. Please ask for the recommended child seats. To avoid the risk of injury,...
  • Page 112 A choice of ECE approved child If individual circumstances require seats is available at your Ford that a child older than 1 year must Dealer. Please ask for the travel in a front seat protected by...
  • Page 113 Seating and safety restraints The correct restraint to be used depends on the child’s age and weight: • Babies under approximately Baby safety seat 2 years and weighing less than 13 kg should be carried in rearward facing baby safety seats in the rear seat.
  • Page 114 Seating and safety restraints • Children between three and a half Booster cushion and 12 years and weighing between 15 and 36 kg should use a booster cushion on the rear seat. An adjustable auxiliary belt fixed to the booster cushion ensures optimum routing of the diagonal belt over the shoulder.
  • Page 115 Dealer. accessibility and usage of this system. The ISOfix system consists of two Ford Dealers are kept up to date rigid latching arms on the child regarding changes and seat, which attach to anchor points improvements to the recommended in the vehicle seat back.
  • Page 116 The tether strap may not work properly if attached somewhere other than the correct tether anchor. Ford does not recommend the use of an ISOfix system without the use of an anti-rotation device, such as a top tether anchor or support leg, correctly installed.
  • Page 117 ISOfix child seats not approved by Ford have not been validated by Ford, and neither the safety nor the suitability of such seats can be certified, whether installed using the ISOfix system or the normal...

  • Page 118: Driving

    Have the braking system checked by an expert before continuing your journey. Ford authorized repairers are recommended. Disc brakes Wet brake discs result in reduced braking efficiency. After leaving a carwash or driving...
  • Page 119 Illumination after releasing the handbrake indicates low brake fluid level. Add brake fluid meeting Ford specification at once to bring the level in the reservoir up to the MAX mark. Have the braking system checked by an expert. Ford authorized repairers are recommended.
  • Page 120 Driving Braking with ABS Two important rules for braking in an In an emergency, depress the emergency with the clutch and apply full force ABS: continuously on the brake pedal. The ABS will be activated immediately, thus allowing you to retain full steering control and, provided there is sufficient space, this will enable you to avoid...
  • Page 121 Driving ABS warning light If the ABS warning light illuminates when driving, it indicates a malfunction. Have this checked by an expert. Ford authorized repairers are recommended. Normal braking (without ABS) will be maintained. Brake system and ABS warning lights...
  • Page 122 Seating and safety restraints Handbrake Always apply the handbrake fully and select first or reverse gear before leaving the vehicle. To apply the handbrake: • Press the foot brake pedal firmly. • While pressing the brake pedal, pull the handbrake lever up smartly to its fullest extent.

  • Page 123: Electronic Stability Program (Esp)

    Driving ELECTRONIC STABILITY PROGRAM (ESP) (If equipped) This system supports the vehicle’s traction, stability and steerability in accelerating and braking, through a combination of engine and brake control. Drivers should never take unnecessary risks even though the Electronic Stability Program system offers inherently safer driving potential.
  • Page 124 Driving If the indicator light does not illuminate when the ignition is switched on or if it stays illuminated whilst driving, it indicates a malfunction. (Unless the system has been switched off by the driver, see below.) During a malfunction, the system will be switched off automatically.
  • Page 125 Dealer. accessibility and usage of this system. The ISOfix system consists of two Ford Dealers are kept up to date rigid latching arms on the child regarding changes and seat, which attach to anchor points improvements to the recommended in the vehicle seat back.
  • Page 126 Driving Handbrake Always apply the handbrake fully and select first or reverse gear before leaving the vehicle. To apply the handbrake: • Press the foot brake pedal firmly. • While pressing the brake pedal, pull the handbrake lever up smartly to its fullest extent.

  • Page 127: Steering

    Driving STEERING COLUMN LOCK/ IGNITION SWITCH The combined steering column lock/ignition switch has the following key/switch positions: 0 Ignition off, steering wheel locked (when engaged only). When the key is removed from the ignition switch, the steering column lock will be activated and prevent the steering wheel from being turned.

  • Page 128: Starting

    Driving GENERAL POINTS ON STARTING The starter will not operate for longer than 30 seconds during each start cycle. Release the ignition key/ignition switch as soon as the engine has started. If the engine has not started, return the ignition key/ignition switch to position 0 and repeat the starting procedure.
  • Page 129 Driving STARTING THE ENGINE Vehicles with a petrol engine Clutch pedal Accelerator Cold / hot engine • Depress the clutch pedal fully and start the engine without touching the accelerator. At temperatures below C , turn the ignition key to position II for at least one second before starting the engine.
  • Page 130 Driving Vehicles with a diesel engine Clutch pedal Accelerator Cold/hot engine • Depress the clutch pedal without touching the accelerator. • Turn the key to position II . If the glow plug indicator light illuminates, wait until it extinguishes before starting. Glow plug indicator light off •...

  • Page 131: Gearbox

    Ensure driver’s mat is fixed to floor clips. Do not stack extra floor mats over the Ford Original Equipment floor mats as these are not positively retained and may affect pedal operation. If fitting after market floor mats ensure that they DO NOT interfere with the safe operation of the vehicles pedals.Please consult your Ford...
  • Page 132 Driving Maximum engine RPM light Illuminates when the maximum engine RPM (revolutions per minute) is reached. Change up a gear or reduce the accelerator pedal position. Automatic transmission The automatic transmission fitted to your vehicle is a 4-speed automatic transmission. The transmissions is electronically controlled.
  • Page 133 Driving Selector lever positions P = Park ....Note: The selector lever positions are only shown in the multifunction display. R = Reverse ....N = Neutral .
  • Page 134 Driving When the engine is started, the brake pedal and the selector lever button must be depressed before the selector lever can be moved from the park position P. The selector lever can be moved out of the position P only if the ignition key is in position II Depress the brake pedal and press the button on the selector lever...
  • Page 135 Driving N = Neutral In this position no power is transmitted to the drive wheels. In this position, you have to depress the brake pedal or apply the handbrake to prevent the vehicle from moving. D = Drive This is the normal driving position. When the brake pedal is released, the vehicle will creep.
  • Page 136 Driving Gears can be skipped by moving the selector lever repeatedly at short intervals. Note: The transmission will perform your manual gear selection when the vehicle road speed and engine speed allow. This improves comfort and safety. The requested gear will appear in place of the - or + symbols in the multifunction display, depending on whether a lower or higher gear has...
  • Page 137 Driving Driving with automatic transmission Moving off With the engine idling and the brake pedal depressed, move the selector lever to one of the driving positions. Release the brakes. The vehicle will start to move slowly in the selected direction. Depress the accelerator pedal to increase speed.
  • Page 138 Driving When the vehicle is stationary, only the manual gears 1 and 2 can be selected. In winter, second gear may be used for initial drive-off on icy or snow-covered surfaces. With the vehicle stationary, first select D then move the selector lever to the right and then backwards (+).
  • Page 139 Driving In manual shifting mode if the accelerator pedal is not depressed past its resistance point, the engine speed will increase to maximum, but no Kickdown effect will result. Releasing the accelerator pedal back past the resistance point disengages the Kickdown function. Emergency park position release lever A mechanical emergency release...
  • Page 140 Driving WARNING LIGHTS AND Power steering failure MESSAGES A malfunction of the power assisted Engine Warning Light steering system is indicated by one of the following: If it illuminates with the engine running, it indicates a malfunction. • On vehicles without a Message If it flashes when driving, reduce the Centre, the Power assisted steering vehicle speed immediately.
  • Page 141 Driving Electronic Accelerator Control (EAC) • ACCELERATION REDUCED This message indicates that there is a malfunction of the Electronic Accelerator Control (EAC). The vehicle can be driven but the acceleration rate will be noticeably reduced. Maximum vehicle speed will be maintained. Have the system checked by an expert as soon as possible.
  • Page 142 Driving Drive modes The automatic transmission Fast Off recognizes driving conditions and If you release the accelerator pedal adapts accordingly to support the quickly, e.g. when driving towards a current driving mode with optimal bend, the transmission maintains shifting strategy. the current ratio to provide increased engine braking.
  • Page 143 Driving REFUELLING Low fuel level warning light When the low fuel level warning light illuminates, refuel as soon as possible. The warning light illuminates when there is enough fuel in the tank for the vehicle to travel 80km. However, this is calculated based on the current average fuel consumption and will vary depending on traffic conditions and...
  • Page 144 Driving Do not use supplemental additives or other engine treatments. They are unnecessary and could lead to engine damage which is not covered by Ford Warranty. Refer also to section Fuel in the chapter Capacities and specifications . When the fuel nozzle cuts off for the second time, the tank is full.
  • Page 145 Fuel containing lead will cause permanent damage to the catalytic converter and HO2S sensor (heated exhaust gas oxygen sensor). Ford can accept no responsibility for damage caused by using leaded fuel. Although such damage is not covered by warranty, please...
  • Page 146 Driving Conditions to avoid: Refuel! • Running out of fuel. • Unnecessarily long engine cranking periods. • Running the engine with a disconnected spark plug. • Push - starting or tow - starting the vehicle with the engine at operating temperature;...

  • Page 147: Vehicle Loading

    Driving VEHICLE LOADING Transporting luggage Luggage and other loads should be placed as low and as far forward as possible within the luggage compartment. Driving with the tailgate/rear door open is potentially dangerous as exhaust fumes may be drawn into the vehicle’s interior.
  • Page 148 Driving Luggage cover The luggage cover is not intended to carry a load. Do not place objects on the luggage cover. 5 - door To remove, detach the two lifting straps on the tailgate. Release the cover at its sides and pull it out horizontally.
  • Page 149 Driving Storage compartments Map pockets (if equipped) Glove compartment Glasses holder (if equipped) Pull to open.
  • Page 150 Driving Sun visors A strap on the sun visor is provided for storing paperwork. Centre console There are different centre console designs. Depending on the equipment fitted, the following features may be incorporated into the console in your vehicle: • Cigar lighter and ashtrays Refer to the section Cigar lighter on page 66.
  • Page 151 Driving • Armrest Storage compartments are incorporated into and under the armrest. •...
  • Page 152 Driving Rear storage compartment (if equipped) Note: The rear stowrage compartment should not be used as an ashtray. Rear armrest (If equipped) Rear screen Sun Blinds (If equiped) Sunblinds are fitted to the inside of the rear screen. To operate, pull upwards and fasten to the hooks provided on the roof lining.

  • Page 153: Trailer Towing

    The permissible trailer weight limit is stated in the vehicle registration document in some countries. If not, Note: 2.0 Dura Torq TDCi engine ask your Ford Dealer for details. Do not exceed the maximum protection. Under servere towing permissible combined weight of the conditions the engine may “Derate”...
  • Page 154 Driving In high altitude regions, thinner atmosphere can reduce engine performance so the following restrictions will apply: Above 1 000 metres, the stipulated maximum permitted gross train 3 000 m weight must be reduced by 10 % for -20 % every 1 000 metres in altitude.
  • Page 155 Driving FUEL CONSUMPTION Traffic and road conditions Fuel consumption and CO engine Slow moving traffic, uphill driving, emissions depend upon the engine, frequent sharp bends and rough the type of transmission, the tyre roads all have an adverse effect on size, the vehicle weight and many fuel consumption.
  • Page 156 To remove the floor mat, reverse the • installation procedure. Only use Use the accelerator gently. Ford Original Equipment floor mats. • Change to the next higher gear as Ensure driver’s mat is fixed to floor soon as possible in order to reach a clips.

  • Page 157: Roadside Emergencies

    Roadside emergencies HAZARD FLASHER SWITCH Use only in an emergency to warn other traffic of vehicle breakdown or approaching danger. Press the switch to turn on or off. The hazard flasher switch does not flash. The hazard lights can be operated when the ignition is on or off.
  • Page 158 Stop the vehicle as soon as safely possible and switch off the engine immediately. Have the engine checked by an expert. Ford authorized repairers are recommended.

  • Page 159: Fuel Injection System Shut-Off Switch

    Roadside emergencies FUEL INJECTION SYSTEM SHUT-OFF SWITCH (vehicles with a petrol engine) The vehicle is equipped with a switch that cuts off the fuel supply in the event of an accident. This is first and foremost for your own safety. Activation of the switch may also be caused through sudden vibrations (e.g.

  • Page 160: Fuses And Relays

    Have any work involving these systems or the replacement of relays or high current carrying fuses carried out by an expert. Ford authorized repairers are recommended. A blown fuse can be identified by a break in the wire. All fuses are a...
  • Page 161 Roadside emergencies Changing a fuse A fuse puller is located in the lid of the auxiliary fuse box. Central fuse box The central fuse box is located behind the glove compartment in the instrument panel. To gain access to the fuse box: •...
  • Page 162 Roadside emergencies Auxiliary fuse box This is located on the left-hand side of the engine compartment. To open, pull up the lever at the rear of the fuse box and lift off the lid. Fuse chart label The fuse chart label shows rectangles representing a fuse or relay.
  • Page 163 Roadside emergencies The following fuses are identified by the “see Owner’s Guide” symbol in the fuse charts in your vehicle. Central fuse box Fuse Ampere Circuits protected rating Electronic modules Data link connector Instrument cluster, central fuse box Accessory to cluster Main electronic power supply Audio modules –...
  • Page 164 Roadside emergencies Auxiliary fuse box (in the engine compartment) Fuse Ampere Circuits protected rating PTC heater (vehicles with a diesel engine) Starter solenoid Battery backup sounder Engine control module HEGO sensors 3 and 4 (vehicles with a petrol engine) HEGO sensors 1 and 2 (vehicles with a petrol engine) Injectors, ignition transformers Engine management module/valves/solenoids...
  • Page 165 Roadside emergencies Symbols in the fuse boxes Symbol Definition Symbol Definition See Owner’s Guide Horn Cooling fan Diesel fuel heater Power assisted Air conditioning steering Central fuse box, Battery sense smart ignition relays Diesel pre-glow Main beam ABS module, ABS/ESP Cigar lighter, rear pumps/valves power point...
  • Page 166 Roadside emergencies Symbol Definition Symbol Definition Door module front passenger/driver, Fuel pump central locking Heated mirrors Heated rear screen Parking lights, Trailer tow module side lights, rear lights Washer pump, heated Driver’s power seat washer jets Dipped beam, daytime Power windows running lights Air bag Light switch...
  • Page 167 Roadside emergencies Symbol Definition Symbol Definition Instrument cluster ignition supply, Battery saver, interior electronic modules, lights immobilizor Door module, Fog lights right rear/left rear Number plate lights Start inhibit relay Heated rear window, Brake lights heated mirrors Central locking, Power door lock ignition switch Reversing light (vehicles with an...

  • Page 168: Bulb Replacements

    Torx screwdriver T6 filter. Always replace a faulty bulb or a suitable flat-bladed screw with a new one of the same type. driver. Have the headlight alignment checked by an expert after each replacement of a bulb. Ford authorized repairers are recommended.
  • Page 169 Driving Rear storage compartment (if equipped) Note: The rear stowage compartment should not be used as an ashtray. Rear armrest (If equipped) Rear screen Sun Blinds (If equiped) Sunblinds are fitted to the inside of the rear screen. To operate, pull upwards and fasten to the hooks provided on the roof lining.
  • Page 170 Roadside emergencies Removing the light assembly • Open the bonnet. • Remove the Torx screw in the light assembly with a screwdriver. • Press down the two snaphooks at the rear of the light assembly using the screwdriver to release it. •...
  • Page 171 Roadside emergencies Opening the headlight assembly Release the four clips and remove the cover. Note: When replacing the cover, ensure that no wires are trapped at the seals. This could lead to the headlight unit misting up. Headlights – dipped beam 55watt H7 halogen bulb Remove the wiring connector, release the wire clip and swivel it to...
  • Page 172 Roadside emergencies Headlights – main beam 55 watt H1 halogen bulb Remove the wiring connector, release the wire clip and swivel it down. Pull out and replace the bulb. Install in the reverse order. Never touch the glass of Halogen bulbs.
  • Page 173 Roadside emergencies Side lights 5 watt wedge base bulb Squeeze the clips on either side of the bulb holder and pull it out. Carefully remove the bulb from the holder. Install in the reverse order. Side repeater indicator 5 watt spherical bulb Carefully pull out the light assembly, complete with the bulb holder.
  • Page 174 Roadside emergencies Front fog light 35 watt H8 Halogen bulb Prise out the fog light bezel at its base, slide the bezel downwards and remove it. Loosen the two screws and pull out the light assembly. Pull off the wiring connector.
  • Page 175 Roadside emergencies Rear lights (5-door) Tail/brake light and direction indicator light • Open the tailgate. • Using a Torx screw driver, remove the two screws and gently pull out the light housing.
  • Page 176 Roadside emergencies • Turn the bulb holder anticlockwise as far as possible and pull it out. • Gently press the bulb into the bulb holder and turn anticlockwise. Remove and replace the bulb. • Install in the reverse order. • After installation, check that the lights operate correctly.
  • Page 177 Roadside emergencies High mounted central brake light Consult an expert. Ford authorized repairers are recommended. Number plate light 5 watt festoon Loosen the two Phillips screws and remove the light assembly. Pull the bulb out and replace it. Install in the reverse order.
  • Page 178 Roadside emergencies Reading lights (If equipped) (vehicles without interior sensors) 5 watt spherical bulb These bulbs can be replaced without having to remove the unit from the roof. Make sure the lights are off. Insert a flat-bladed screwdriver into the recess between the body of the unit and the lens at the opposite side to the switches.
  • Page 179 Roadside emergencies Vanity mirror lights 5 watt wedge based bulb Prise out the assembly with a flat-bladed screwdriver. Remove and replace the bulb. Snap the assembly back into the surround locating edge opposite the switch first. Luggage compartment light 5 watt spherical bulb Carefully prise out the light assembly from the holder with a flat-bladed screwdriver and remove...

  • Page 180: Changing A Wheel

    Roadside emergencies CHANGING A WHEEL It is extremely important to observe the following precautions before jacking up the vehicle: • Park your vehicle in such a position that neither the traffic nor you are hindered or endan- gered when changing a wheel. •...
  • Page 181 Roadside emergencies Spare wheel Use only approved wheel and tyre sizes. Using other sizes could damage the vehicle and will make the National Type Approval invalid. If the size of the spare wheel rim or tyre differs from the other fitted wheels, these rules must be followed: •...
  • Page 182 Roadside emergencies • Raise the rear of the floor cover in the luggage compartment. • Completely unscrew the bolt anticlockwise. • Lift out the spare wheel. • Remove the jack which is located beneath the spare wheel. • Install the defective wheel in the reverse order.
  • Page 183 Roadside emergencies Wheel chock (accessory) When changing a wheel, secure the diagonally opposite wheel with an appropriate block or wheel chock, if necessary. Pull the two halves of the chock apart, and twist 180 degrees. • When jacking the front of the vehicle on a flat surface, wedge the chock between the ground and the tyre of the diagonally opposite...
  • Page 184 Roadside emergencies Jacking points Refer to the warning in the section Changing a wheel on page 172. The jack must only be used on specific areas under the sills. These are easily identified by small indentations near the sill. Points (1) can also be used for trolley jacks, workshop hoists or jack stands.
  • Page 185 Replacement locks and • Insert the flat end of the wheel nuts can be obtained by wheelbrace between the rim and taking this certificate to your Ford Dealer. the hub cover and twist carefully to remove the cover. •...
  • Page 186 Roadside emergencies Fitting a wheel Note: The wheel nuts of alloy wheels and spoked steel wheels can also be Alloy wheels must never be used for the steel spare wheel secured using wheel nuts for steel wheels. Push the wheel onto the wheel studs.
  • Page 187 Roadside emergencies BATTERY Safety advice Always take the following precautions when handling a battery: • Wear eye protection. Do not let acid or lead particles get in contact with your skin or clothing. • Battery acid is caustic. Wear gloves and eye protection. Do not tilt the battery, acid might come out of the ventilation openings.
  • Page 188 Ignition warning light If the Ignition warning light illuminates whilst driving, switch off all unnecessary electrical equipment and drive immediately to the nearest expert. Ford authorized repairers are recommended. For further details, refer to the section Starting from page 121 onwards .
  • Page 189 It is therefore recommended that you have the battery removed and installed by an expert. Ford authorized repairers are recommended. • Batteries are heavy. Ensure that you have a good grip and that the weight of the battery is within your individual lifting capability.
  • Page 190 Roadside emergencies Take great care to avoid simultaneous contact of both battery poles with metal tools or inadvertent contact between the positive pole and the vehicle bodywork. • When reconnecting a battery always connect the positive ( +) cable first and then the negative (–) cable.

  • Page 191: Jump Starting

    Roadside emergencies JUMP STARTING Connect batteries with only the same nominal voltage (12 volts). Use jump leads with insulated clamps and adequate size cable. Do not disconnect the battery from the vehicle’s electrical system. Suitable jump leads can be obtained from your dealer.
  • Page 192 Roadside emergencies To start the engine • Run the engine of the vehicle with the booster battery at moderately high speed. • Start the engine of the vehicle with the flat battery. • Run both vehicles for a minimum of three minutes before disconnecting the leads.

  • Page 193: Towing The Vehicle

    Roadside emergencies Ensure the towing eye is screwed in fully TOWING THE VEHICLE and tightened using the wheel nut wrench The vehicle is equipped with a as a lever (1/4 of a turn) to avoid the risk screw-in towing eye for the front of the thread being damaged or the towing and rear, for attaching a tow rope.
  • Page 194 Roadside emergencies The ignition key must be set to position II when the vehicle is being towed so that the steering, direction indicator lights and brake lights are fully operational. Since the brake servo and the power steering do not operate with the engine switched off, you will need to exert greater force to the brake pedal and...
  • Page 195 Roadside emergencies Starting manual transmission vehicles by towing or pushing To prevent damage to the catalytic converter you must not push - or tow - start your vehicle when the engine is at operating temperature. Use jump leads and a booster battery. It is possible to start a cold engine by towing or pushing the vehicle.
  • Page 196 Roadside emergencies Towing vehicles with automatic transmission When a vehicle with an automatic transmission is towed, the selector lever must be in position N (neutral). Never tow a vehicle with an automatic transmission faster than 50 km/h or further than 50 kilometres. If it is necessary to tow the vehicle a greater distance, the drive wheels must be lifted clear off the ground.

  • Page 197: Cleaning

    Cleaning WASHING YOUR VEHICLE Cleaning materials must not be disposed of in the household waste. Use your local authorised waste disposal facilities. Use only car washing areas that have ecologically harmless drainage systems. The most important element required to maintain the vehicle’s paintwork is clean water.

  • Page 198: Underbody Preservation

    Note: Do not use round spray touched up by an expert. Ford nozzles. authorized repairers are recommended. Remember to include regular underbody washing during the Cleaning wheels winter to remove corrosive salt.
  • Page 199 Cleaning seat belts months. Use interior cleaner or clean warm Leather must not be made too wet. water. Ford Interior Cleaner is Take all necessary precautions to recommended. Dry naturally, away ensure that no water gets into the from artificial heat.
  • Page 200 Cleaning products Paint chip repair For good results use the following Paint damage from road chippings products from the Ford Car Care or minor scratches can be repaired Chemicals Programme: using aerosol paint spray or touch-up paint. The Ford Accessory •...

  • Page 201: Maintenance

    Maintenance Maintenance Maintenance chart Keep oils, greases and vehicle fluids away from Every day check: children. Follow the instructions on the containers. Avoid skin • Operation of all exterior and contact with used engine oil. interior lights. Replace burnt out or dim bulbs and make sure that all lenses are clean.

  • Page 202: Opening The Bonnet

    Maintenance Opening the bonnet • Swivel the Ford badge in the radiator grille to the side and turn the key first anticlockwise (1). Raise the bonnet slightly and turn the key fully clockwise (2) to open the bonnet. To prevent damage to, or...

  • Page 203: Engine Compartment

    Maintenance Engine compartment Description See page Screen washer fluid reservoir Engine coolant reservoir 202 - 203 Engine oil filler cap Brake/clutch fluid reservoir Battery Auxiliary fuse box No maintenance Air cleaner necessary Engine oil dipstick 197 - 198 Power steering fluid reservoir Automatic transmission oil level guage 1 For easy identification, filler caps and the engine oil dipstick are marked in colour.
  • Page 204 Maintenance 2.0l Duratorq-TDCi...
  • Page 205 Maintenance 2.0l Duratec-HE Engine oil dipstick The oil consumption of your engine is influenced by many factors. New engines reach the normal value only after approximately 5 000 km. Diesel and high performance engines consume slightly more. Under high loads your engine will also consume more oil.
  • Page 206 MAX mark by some millimetres due to thermal expansion. If it lies at the MIN mark refill using only engine oil meeting the Ford specification. Approximately 2.0l Duratorq-TDCi 0.75 litre (diesel engine 1.5 litre) of engine oil will raise the level of the oil film on the dipstick from the MIN to the MAX mark.
  • Page 207 Have the engine checked by an expert. Ford authorized repairers are recommended. Engine oil filler cap The oil filler cap is a twist-on fit design. To open, turn the cap anti-clockwise.
  • Page 208 Maintenance Empty and used oil containers must not be disposed of in the household refuse. Use your local authorised waste disposal facilities when disposing of these. Note: When removing the engine cover on the 2.0 l Duratec-HE engine, the oil filler extension needs to be removed first.
  • Page 209 Maintenance Add only brake fluid that meets the Ford specification. Refer to section Vehicle fluids, page 213 onwards. Have the system checked for leakage by an expert as soon as possible. Ford authorized repairers are recommended. Wipe the cap and the top of the...
  • Page 210 Maintenance Cooling system reservoir The ignition must be switched off before working in the engine compartment. Under some operating conditions, the cooling system fan may continue to run for several minutes after the engine has been switched off. This is quite normal. Take care not to get any fingers or clothing such as ties or scarves caught in the fan.
  • Page 211 Maintenance Engine compartment Description See page Screen washer fluid reservoir Engine coolant reservoir 202 - 203 Engine oil filler cap Brake/clutch fluid reservoir Battery Auxiliary fuse box No maintenance Air cleaner necessary Engine oil dipstick 197 - 198 Power steering fluid reservoir Automatic transmission oil level guage 1 For easy identification, filler caps and the engine oil dipstick are marked in colour.
  • Page 212 Maintenance 2.0l Duratorq-TDCi...
  • Page 213 Maintenance 2.0l Duratec-HE Engine oil dipstick The oil consumption of your engine is influenced by many factors. New engines reach the normal value only after approximately 5 000 km. Diesel and high performance engines consume slightly more. Under high loads your engine will also consume more oil.
  • Page 214 For this reason, use coolant which meets the Ford specifications. Refer to section Vehicle fluids, page 213 Add coolant that meets the Ford onwards. Specification. For further details, refer to section Vehicle fluids, page 213 onwards.
  • Page 215 Maintenance Checking power steering fluid level The fluid level should come up to the MAX mark when the engine is cold. If it drops below the MIN mark, top up with the specified fluid. For further details, refer to section Vehicle fluids, page 213 onwards.
  • Page 216 Full steering will be maintained but you will need to exert greater force on the steering wheel. Have the system checked by an expert as soon as possible. Ford authorized repairers are recommended. Screen washer systems Front and rear washer systems are supplied from the same reservoir.

  • Page 217: Tyre Information

    Maintenance TYRE INFORMATION For your safety Check the tyre pressures when you refuel, with the tyres cold (remember to include the spare tyre). Refer to section Tyre data , page 216, for recommended tyre pressures. Observe the correct tyre pressures especially with high payloads and when driving at high speeds.
  • Page 218 Traces of grease, silicone and fuel also prevent wiper blades from functioning properly. Ford cleaning solutions are recommended for cleaning wiper blades. Clean the wiper blade lips with water applied with a soft sponge.
  • Page 219 Maintenance Adjusting screen washer jets The eye ball jets can be adjusted precisely using a pin. The washer jet for the rear screen is located in the tailgate spoiler to the right of the high mounted central brake light. To ensure the system functions properly, keep the washer jets free of snow and ice.

  • Page 220: Capacities And Specifications

    Capacities and specifications IDENTIFICATION NUMBERS Vehicle identification plate The vehicle identification plate is located at the base of the B-pillar. This plate bears information on vehicle type, identification number, vehicle weights and it identifies various components. Vehicle identification number The vehicle identification number is additionally stamped onto the plastic tag on the left-hand side of the instrument panel.
  • Page 221 Vehicles with a petrol engine proprietary diesel fuels which contain Use only high quality fuel according a mix of up to 5% RME. Ford can to specification EN 228 or accept no responsibility for damage equivalent specification.

  • Page 222: Engine Data

    Capacities and specifications ENGINE DATA Engine type 1.6l 2.0l 2.0l (BZ) Duratec- Duratorq- TDCi 1598 1999 1997 Cubic capacity Power output kW at rev/min 77/6000 107/6000 100/4000 Maximum torque Nm at rev/min 145/4000 185/4500 320/2000 Required fuel grade Unleaded fuel 93/95 Diesel octane Maximum continuous engine speed...

  • Page 223: Engine Oil

    Never top up above the increased emission levels. MAX mark on the dipstick. Ford Dealers are kept up to date regarding changes and Do not use supplemental improvements to the recommended additives or other engine oils.

  • Page 224: Vehicle Fluids

    Manual transmission Ford High Pressure Gear Oil WSD-M2C 200-C (5/6-speed) SAE 75W90 Automatic transmission Mercon V WSS-M2C 202-B Power assisted steering Ford Power Steering Fluid WSS-M2C 204-A Brake and clutch fluid BASF Hydraulin 417-1 (DOT4++) Coolant Motorcraft SuperPlus Antifreeze WSS-M97 B44-D 1 The transaxles do not require any maintenance.

  • Page 225: Vehicle Weights

    (where applicable). For further guidance consult your Ford Dealer. Exceeding these values causes changes in the braking and driving behaviour of the vehicle and might cause accidents and may lead to engine overheating.
  • Page 226 Capacities and specifications 4-door Vehicle weight (kg) 5-door 1.6 l BZ 16V 77kW Manual Transmission Gross Vehicle Mass 1745 1725 Gross Combination Mass 2945 2925 Gross Axle Mass - Front Gross Axle Mass / Axle-unit Mass-Rear 2.0 l Duratec 16V 107 kW Manual Transmission Gross Vehicle Mass 1820 1795...

  • Page 227: Tyres

    Capacities and specifications TYRES Tyre pressure Tyre pressures should be checked when the tyres are cold, before commencing a journey. If winter tyres are used, the tyre pressures recommended by the tyre manufacturers should be adhered to. The following tyre pressures are for road speeds up to 160 km/h.
  • Page 228 Capacities and specifications Tyre pressure decal Notes on tyre pressure • The tyre pressures listed apply for cold tyres. • The tyre pressures must be increased to the values listed below if you drive at high speed for a prolonged period or continuously. •...
  • Page 229 When fitting tyres, it is strongly recommended that you use the make originally fitted to your Alloy wheels must never be vehicle or seek advice from an secured using wheel nuts for expert. Ford authorized repairers steel wheels. are recommended.
  • Page 230 Ford authorized repairers are recommended. If is not re-programmed, then the speedometer might not display the correct speed.
  • Page 231 Capacities and specifications DIMENSIONS 4 /5-door 4 - Door 5 - Door Dimensions A = Maximum length 4488 4342 B = Overall width (including exterior mirrors) 1991 1991 1454 - 1497 C = Overall height (EC kerb weight) 1454 - 1497 D = Wheelbase 2640 2640...
  • Page 232 1030.9 – 5 1031 F = Centre of towball – centre 1. attachment point 399.5 – 2.5 423.8 G = Centre of towball – centre 2. attachment point 699.5 – 2.5 723.8 All measurements refer to towing equipment officially released by Ford.
  • Page 233 Capacities and specifications ANTI-THEFT ALARM SYSTEM If the type approval of your anti-theft alarm system is inspected, refer to the list of official test numbers below.

  • Page 234: Accessories

    • When adding passengers and luggage to your vehicle, do not exceed the total weight capacity of the vehicle or of the front or rear axle. Consult your Ford Dealer for specific weight information.
  • Page 235 Accessories Please keep in mind that some HANDS-FREE MOBILE PHONE features (automatic switch-off time, volume etc.) may be set Please note that using the independantly using your mobile phone when driving may phone’s own software. divert your attention from the If your vehicle is not delivered with traffic and prolong your reaction a pre-installed hands-free kit, your...

  • Page 236: Index

    Index Accessories ... . 223 - 224 Battery ....179 - 182 Booster battery ..183 - 184 Air bag .
  • Page 237 Index Capacities and specifications ..Oil filter ..... Catalytic converter ..138 - 139 Oil pressure warning light .
  • Page 238 Index Unleaded fuel ..136 - 138 Immobilisation system . . . 80 - 81 Coded keys ....Fuel filler flap .
  • Page 239 Index Warning Light. See Keys, coded for immobilisation and indicator warning lights system ......Locks ......Lights Opening the bonnet .
  • Page 240 Index Mirrors Reading lights ....Auto-dimming mirror ..Rear screen, heated ... . Folding outside rear-view mirrors Refill capacities .
  • Page 241 Index Seats ..... . 85 - 90 Trailer Child restraints ... . 105 - 112 Air conditioning when trailer towing...
  • Page 242 Index Transporting luggage ... . Vehicle weight ....Warning and indicator lights .
  • Page 243 Notes...
  • Page 244 Notes...

Table of Contents