Ecoflam BLU TS 3000.1 PRE HT Manual page 8

EN
TEST BOILER - FLAME DIMENSIONS
L (m)
11
10
9
8
7
6
5
4
3
2
0
1000 2000 3000
1000 2000 3000 4000
100 200 300 400
Ø (m) 2
1,8
1,6
1,4
1,2
1
0,8
0,6
0,4
0,2
0
1000 2000 3000
1000 2000 3000 4000
100 200 300 400
OVERALL DIMENSIONS AIR FLANGE
8 www.ecoflam-burners.com
FLAME LENGHT GAS BURNERS
4000 5000 6000 7000 8000 9000
5000 6000 7000 8000 9000 10000 11000
500 600 700 800 900 1000 1100
FLAME DIAMETER GAS BURNERS
4000 5000 6000 7000 8000 9000
5000 6000 7000 8000 9000 10000 11000
600
500 700 800 900 1000 1100
15
12
kcal/h
10000 11000 12000 13000 14000 15000
x 1000
12000 13000 kW
14000 15000 16000 17000
Nm 3 /h
1200 1300 1400 1500 1600 1700
kcal/h
10000 11000 12000 13000 14000 15000
x 1000
12000 13000 kW
14000 15000 16000 17000
Nm 3 /h
1200 1300 1400 1500 1600 1700
400
185
The burner/boiler matching does not pose
any problems if the boiler is CE type-
approved.
If the burner must be combined with a
boiler that has not been CE type-approved
and/or its combustion chamber dimensions
are clearly smaller than those indicated in
diagram, consult the manufacturer.
The firing rates were set in relation to
special test boilers, according to EN676 -
EN267 regulations.
The sizes are indicative and dipend on
the configuration, to the combustion
chamber pressure and to the draught.
The values have been taken out from
tests executed with flame tubes.
The dimensions of the flame are made
in test boiler in laboratory without
resistence therefore exists max and
min lenght that take into account the
difference in lenght that comes from the
boiler backpressure.
Example:
Burner thermal output = 8000 kW;
L flame (m) = 5 m (medium value)
D flame (m) = 1 m (medium value)
WARNING: Some flame modifications
can be done in our FLEXSHOP in the
factory in order to shape the flame and
adapt it to some special boiler
or application.
185
15
420010717300