Ecoflam BLU TS 3000.1 PRE HT Manual page 6

EN
BURNER DESCRIPTION
Gas train - Kit - Accessories: assembly to the burner
To be supplied by the installer
Gas
To be supplied by the installer
MATCHING GAS TRAIN WITH DIAGRAM OF PRESSURE DROPS
ARE IN THE DEDICATED SECTION OF THIS MANUAL
Ecoflam gas trains are delivered separately for all gas and dual fuel burners and are available in different configurations:
Double gas valves with actuators and regulator VGD Siemens and min pressure switch + ACS gas filter
VGD 20.503 Rp 2" / VGD 40.065 - 40.080 - 40.100 - 40.125
1 2 3
!
GTCP-...* WARNING: in order to fit the gas train, the corresponding connection pipe must be ordered (GTCP size and fitting depend on the
burner and the gas train selected).
HOW TO INSTALL THE GAS TRAIN INTO THE BURNER AND CALCULATE THE OVERALL DIMENSIONS:
refer to the dimension page and thE gas train manual for all detailed information
!
WARNING: EN676 compulsory kit and accessories in order to comply to the safety regulations. Additional accessories and kits
shall be installed by the installer in accordance to the local safety regulations and codes of practise.
Gas governor / Filter
FGDR - FILTER
Compulsory EN676
6 www.ecoflam-burners.com
144
141
143 142
7 6
9 5 8 11
Max Pressure switch
KITPRES50
KITPRES150
160
314
313
150
151
120
Air
M
349
1. Main gas pipe
2. Ball valve
3. Antivibration coupling
5. Min gas pressure switch
6. Safety gas valve + 10. Actuator
7. Working gas valve + 11. Actuator
8. Gas leakage control
9. Gas filter
10
KIT - MAX Gas pressure switch
ACS - Gas train connection pipe
Other accessories
150 Throttle valve
151 Gas train Siemens VGD....
160 Kit tightness control (optional)
313 Min.gas pressure switch
314 Max.gas pressure switch (optional)
349 Air/gas damper motor
100
GAS TRAIN
420010717300
ACS
ACS
KITTC *
ACS
KITPRES
GTCP **