Setting Up Conference Call - Sennheiser EPOS SDW 5000 Series User Manual

40 MAkInG CALLs UsInG tHe HeADset sYsteM

Setting up conference call

With one base station, you can:
MASTER
CALL 3
• A merge up to three calls from the
sources into one teleconference (see previous
chapter),
• B set up a small conference
headset and an additional ePos UsB or Bluetooth
headset,
All conferencing options can be combined. It is for example possible to set up a large conference with 2 audio sources
merged, where multiple sDW headsets and one Bluetooth or UsB device is connected.
Setting up a small conference via USB or Bluetooth headset
MASTER
Put on the MAsteR headset.
X
Connect your UsB or Bluetooth headset (see
X
page 16/17) with the base station.
the LeD lights up white.
Press the hook button on the MAsteR headset within
X
10 seconds to add the GUest headset.
the voice prompt "Conference pairing successful" is
announced in the GUest headset.
Call the other party (see page 34).
X
SDW 5000 series headset system
A
MASTER
CALL 1
GUEST 1
CALL 2
connected audio
with an sDW 5000
GUEST 1
B
MASTER
GUEST 1
GUEST 2
GUEST 3
• C a large conference
four sDW 5000 headsets,
• D set up a conference with a ePos
(e. g. sP 20).
click
to end the call but
end the call via your audio source, the base station or
X
the MAsteR headset.
All conference participants remain connected and a
new call can be initiated with them.
to end the call and the conference:
end the call via your audio source, the base station or
X
the MAsteR headset.
Place the MAsteR headset in the magnetic holder
X
of the base station to disconnect all conference
participants.
C
with up to
UsB speakerphone
keep the conference:
D