Configuring The Headset System; Configuring The Headset System Using Epos Connect Or The Dip Switches - Sennheiser EPOS SDW 5000 Series User Manual

26

ConFIGURInG tHe HeADset sYsteM

Configuring the headset system

Configuring the headset system using EPOS Connect or the DIP switches

You can adjust the headset system via the software
in EPOS Connect overwrite the DIP switch settings.
ePos Connect offers additional settings – marked with the adjacent icon in the following chapters. In
addition to the settings described here,
software.
Configuring the desk phone – DIP switches 1 and 2 – SDW 5 BS only
If you do not have a desk phone with an eHs solution, the HsL 10 II can be used for remote call control.
Switch position
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
* For undetectable phones without call control: touch the icon
second touch will close the link and allows to operate calls on other audio sources ( / ).
SDW 5000 series headset system
ePos Connect
S1 S2
1 2 3 4 5 6 7 8
Function
DHSG mode
Call control with phones using DHsG
standard
Manual mode
Manual operation* of handset or
handset lifter HsL 10 II
OptiPoint mode
Call control with optiPoint phones
1 2 3 4 5 6 7 8 1 2
ePos Connect or the DIP switches on the base station. Changes
offers further configurations – see options in the
to configure the system via the DIP
Use a pointed object to set the DIP switches to the
X
desired position. After a DIP switch is changed:
Re-boot the system by disconnecting the power
X
supply and UsB cable shortly from the power.
to configure the system via
Connect the base station to your computer and install
X
the required software (see page 13).
start ePos
X
Click on "settings" in the menu and choose your
X
sDW 5000 device.
Change to the desired values and save.
X
Switch position
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
No assigned modes
3 4 5 6 7 8
to manually establish a link to the desk phone. A
switches:
ePos Connect:
Connect.
Function
Panasonic mode
Call control with Panasonic
phones
Auto link
Wireless link between headset
and base station established
automatically
MSH mode
Call control with phones using
MsH standard