Accepts An Incoming Call And Ends The Active Call; Managing Two Calls; Ends The Active Call And Makes The Call On Hold Active; Stops Redialing - Sennheiser VMX 200 Instruction Manual

Using the VMX 200

Managing two calls

You can manage two calls:
• from either two Bluetooth devices or
• from one Bluetooth device.
If you want to manage two calls from one Bluetooth device, disconnect
the second Bluetooth device.
If you receive a call during an active call:
Press the multi-function button:
2nd
Duration Active call incoming call Function
1 s
2 x
If you put an active call on hold (toggling):
Press the multi-function button again:
2nd call
Duration Active call put on hold Function
2 x
1 s
Redialing
The redialing function must be supported by your mobile phone or
Bluetooth device (with HF profile respectively) and be activated.
Press the multi-function button:
Duration Function

Redials the last number

1 s

Stops redialing

Accepts the incoming call and
ends the active call
Rejects the incoming call and
continues the active call
Accepts the incoming call and
puts an active call on hold
(toggling – phone dependent)
Ends the active call and makes
the call on hold active
(phone dependent)
Toggles between two calls
(phone dependent)
Establishes a conference call
(for 2 calls on one Bluetooth
device only)
Beep(s)
VMX 200 | 17