30
ConFIGURInG tHe HeADset sYsteM
Adjusting the audio signal for desk phones using the ABC switch – SDW 5 BS only
1
Put on the headset.
X
3
Lift the handset.
X
You hear a dial tone.
Adjusting the transmission volume
Adjusting the microphone volume for the connected desk phone – SDW 5 BS only
By default, the microphone volume control is set to 4. this setting is suitable for most telephones.
1
Make a call to someone who will help you find the
X
correct sensitivity setting for your microphone
(see page 27).
Adjusting the microphone volume for the connected computer
Activate the option "Automatically adjust microphone sensitivity" in the settings of your softphone – if available.
X
Adjust the microphone sensitivity via your operating system, so that the other party can hear you at a comfortable
X
level (see Help function of your operating system).
SDW 5000 series
headset system
2
S1 S2
Press the button
on the base station.
X
4
1 2 3 4 5 6 7 8
set the
ABC
switch to the position A,
X
you can hear a clear dial tone in the headset.
2
turn the microphone volume control so that the other
X
party can hear you at a comfortable level.
B
or
C
so that
S1 S2
1 2 3 4 5 6 7 8