Table of Contents
Advertisement
50
CLeAnInG AnD MAIntAInInG tHe HeADset sYsteM
Replacing/removing the headset's rechargeable battery
CAUTION
Danger of damage to the product!
During the warranty period, the rechargeable battery must only be replaced by an authorized ePos service center,
otherwise the warranty will be null and void.
Contact your ePos service center if the rechargeable battery needs to be replaced. to find a ePos service partner
X
in your country, visit www.eposaudio.com.
outside the warranty period, the rechargeable battery may be replaced or removed by any qualified service center or
qualified technician of your It or service department. Instructions for qualified technicians on how to replace or remove
the battery are available from the ePos service partner.
Updating the firmware of the products
You can update the firmware of your headset system and Bluetooth dongle by using the free
Connect the base station to your computer and install the required software (see page 13).
X
Updating the firmware of the base station and the headset
1
Place the headset into the magnetic holder of the base
X
station.
start
ePos
Connect.
X
ePos Connect
checks if the installed firmware is the latest version available on the ePos server. If
required, upgrade to the latest version. the headset is automatically updated via the base station.
Updating the firmware of the Bluetooth dongle BTD 800 USB
Insert the BtD 800 UsB into the UsB port on the
X
base station. some older dongle versions need to be
connected directly to the computer in order to be
updated. "new" dongles can be identified by the two
grey lines on the bottom side of the housing.
SDW 5000 series
headset system
2
Connect the base station via the UsB cable with a UsB
X
port of your computer.
EPOS Connect
start
ePos
Connect.
X
ePos Connect
checks if the installed firmware is the
latest version available on the ePos server. If required,
upgrade to the latest version.
ePos Connect
software.
x
Hide quick links:
Advertisement
Table of Contents
