Making A Conference Call - Sennheiser D 10 series Instruction Manual

Making calls using the headset
GUEST 1
MASTER
GUEST 3
27 | D 10 series

Making a conference call

The headset system allows you to make a conference call with up to
4 D 10 series headsets. The first headset paired (master) is used control
the call establishment and end of conversation.
Pairing the MASTER headset with the base station
The Link LED on the base station is off (headset is disconnected) or
GUEST 2
lights up red (no headset paired).
Place the master headset into the base station.
The Headset LED alternately flashes blue/red until a link to the base
station is established. The Headset LED flashes blue 3 times.
Take the headset out of the base station and press the Link button to
connect the headset with the base station.
The Link LED
New MASTER
or
on the base station lights up blue.
3x