Connecting The Transmitter To The Power Supply System - Sennheiser Set 860 Instruction Manual

Putting the Set 860 into operation
14 | Set 860
Connecting the transmitter to the power supply
system
Connect the connector of the power supply unit to the
1
yellow socket of the transmitter.
Select a suitable country adapter and slide it onto the
2
power supply unit until it clicks audibly into place.
Plug the power supply unit into the wall socket.
3
All LEDs on the transmitter light up for 5 seconds. The
transmitter is in standby mode.
EU
UK
US
AU
1
1A
1A
2
3