Configuring The Headset System; Adjusting The Headset System Using The Dip Switches - Sennheiser D 10 series Instruction Manual

Configuring the headset system

Configuring the headset system

Adjusting the headset system using the DIP switches

Use a pointed object (e.g. a ball pen) to set the DIP switches to the
desired position.
2
Configuring the handset lifter/hook switch – DIP switches 1 and 2
Switch position Function
Manual operation
Lifts/hangs up the handset manually or using
the handset lifter (Sennheiser HSL 10).
Electronic hook switch (DHSG standard)
Call control via the headset system.
For faster link establishment, see Fast Link.
Electronic hook switch (MSH standard)
Call control via the headset system.
Fast Link for DHSG standard and
HSL 10 handset lifter
Recommended for frequent callers. Shorter battery
life. Fast link establishment without delay due to
hidden link to the base station.
Adjusting the ring tones of the base station – DIP switches 1 and 2
Switch position Function
Ring tone is off.
Ring tone 1 is activated.
Ring tone 2 is activated.
Ring tone 3 is activated.
D 10 series | 16