Configuring The Headset System; Configuring The Headset System Using Headsetup™ Pro Or The Dip Switches - Sennheiser SDW 10 HS User Manual

23

ConFIGURInG tHe HeADset sYsteM

Configuring the headset system
Configuring the headset system using HeadSetup™ Pro or the DIP switches
You can adjust the headset system via the software
in HeadSetup™ Pro overwrite the DIP switch settings.
Headsetup™ Pro offers additional settings – marked with the adjacent icon in the following chapters. In
addition to the settings described here,
the software.
Configuring the desk phone – DIP switches 1 and 2 – SDW 5 BS only
If you do not have a desk phone with an eHs solution, the HsL 10 II can be used for remote call control.
Switch position
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
* For undetectable phones without call control: touch the icon
second touch will close the link and allows to operate calls on other audio sources ( / ).
SDW 5000 series headset system
Headsetup™ Pro
S1 S2
1 2 3 4 5 6 7 8
Function
DHSG mode
Call control with phones using DHsG
standard
Manual mode
Manual operation* of handset or
handset lifter HsL 10 II
OptiPoint mode
Call control with optiPoint phones
1 2 3 4 5 6 7 8 1 2
Headsetup™ Pro or the DIP switches on the base station. Changes
offers further configurations – see options in
to configure the system via the DIP
Use a pointed object to set the DIP switches to the
desired position. After a DIP switch is changed:
Re-boot the system by disconnecting the power supply
and UsB cable shortly from the power.
to configure the system via
Connect the base station to your computer and install
the required software (see page 11).
start Headsetup™
Click on "settings" in the menu and choose your
sDW 5000 device.
Change to the desired values and save.
Switch position
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
No assigned modes
3 4 5 6 7 8
to manually establish a link to the desk phone. A
switches:
Headsetup™ Pro:
Pro.
Function
Panasonic mode
Call control with Panasonic
phones
Auto link
Wireless link between headset
and base station established
automatically
MSH mode
Call control with phones using
MsH standard