Agilent U5309A Pcie High-Speed Digitizer Introduction - Agilent Technologies U5309A Startup Manual

Agilent U5309A PCIe High-Speed Digitizer Introduction

The scope of this Startup Guide is to detail the processes of receiving and installing the Agilent U5309A PCIe
High-Speed Digitizer, installing the required software, and verifying basic module operation. If you have any
questions after reviewing this information, please contact your local Agilent representative or contact us through
our website at www.agilent.com/find/contactus
Related Documentation
This Startup Guide and the documentation listed below are contained on the
CD supplied with your product and at www.agilent.com/find/U5309A.
Select Technical Support > Manuals.
U5309A User Manual
l
Help systems for the Agilent device drivers (IVI-C and IVI-COM, and
l
LabVIEW G)
Product specifications (Data Sheet)
l
Follow the Startup Sequence
This Start-Up Guide is intended to lead the user through the four steps of product installation as summarized in the
diagram below. An optional fifth step shows how to perform an operational verification of the U5309A PCIe High-
Speed Digitizer.
Closely follow the startup process flow in this document. Deviating from the sequence can
cause unpredictable system behavior, damage your system, and may cause personal injury.
Agilent U5309A Startup Guide
Step 1: Unpack and Inspect
Step 2: Verify Shipment
Step 3: Install Drivers and Software
Step 4: Install Modules
Agilent U5309A PCIe High-Speed Digitizer Introduction
7