Adapter Function Measurement - AEMC 203 User Manual

4.2.11 Adapter Function Measurement

4.2.11.1 In DC mode
Measurement Range (1)
Specified Measurement Range (2)
Accuracy
Resolution
Input Impedance
4.2.11.2 In AC mode
Measurement Range (1)
Specified Measurement
Range (2)
Accuracy
Resolution
Input Impedance
Note (1) The basic display is 6000 counts. The position of the decimal count
and the display of multiples (m and k) depend on the programming of
the scale factor.
•
•
Note (2) - The max. bandwidth is 1kHz.
Specific specifications in MAX/MIN mode (from 10Hz to 1kHz):
•
Accuracy: add 1% R to the values of the table above.
•
Capture of the extreme: approximately 100ms.
measurement range
In DC, the display indicates "+OL" above +5999 counts and "-
OL" below -5999 counts. The "-" and "+" signs are managed
(polarity).
In AC, the display indicates "OL" above 5999 counts.
0.0 to 599.9mV
0 to 100% of the measurement range
0.1mV
5.0 to 599.9mV
1 to 100% of the
5.0 to 59.9mV
± (1% R + 10cts)
60.0 to 599.9mV
± (1% R +3cts)
0.1mV
36
0.60 to 5.999V
1% R ±3cts
1mV
10MΩ
0.600 to 5.999V
0 to 100% of the
measurement range
1% R ±3cts
1mV
10MΩ