GEM B56 Operating Instructions Manual page 27

Attention!
Manual override
Only
actuate when
power is switched off
M
SN
7. Insert bolts SN in all holes in the flange.
8. Slightly tighten the bolts SN and nuts M diagonally.
9. Check the alignment of the piping.
10. Tighten nuts M diagonally.
Comply with appropriate regulations for the connections!
After the installation:
11. Re-attach or reactivate all safety and protective devices.
www.gemu-group.com
SW3
27 / 48
11 Installation in piping
GEMÜ B56