Section 11 - Generator Power Guidelines - Miller Panther 307 Owner's Manual

SECTION 11 – GENERATOR POWER GUIDELINES
11-1. Selecting Equipment
11-2. Grounding Generator To Truck Or Trailer Frame
Electrically bond generator
frame to vehicle frame by
metal-to-metal contact.
1
2
3
OR
1 2
GND/PE
1
2
3
Y Do not use 2-prong plug un-
Be sure equipment
has this symbol
and/or wording.
ref.gen_pwr 6/02 – Ref. ST-159 730 / ST-800 577
Y Always ground generator
1
2
3
Connect cable from equipment
ground terminal to metal vehicle
frame. Use #10 AWG (2.6 mm
larger insulated copper wire.
Y If unit does not have GFCI re-
3
Generator Power Receptacles
– Neutral Bonded To Frame
3-Prong Plug From Case
Grounded Equipment
2-Prong Plug From Double
Insulated Equipment
less equipment is double in-
sulated.
frame to vehicle frame to pre-
vent electric shock and static
electricity hazards.
Equipment Grounding
Terminal (On Front Panel)
Grounding Cable (Not
Supplied)
Metal Vehicle Frame
2
) or
ceptacles, use GFCI-pro-
tected extension cord.
S-0854
OM-4408 Page 49