15
|
Unit installation
15 Unit installation
In this chapter
15.1 Preparing the installation site
15.1.1 Installation site requirements of the indoor unit
Installer and user reference guide
42
WARNING
Installation shall be done by an installer, the choice of materials and installation shall
comply with the applicable legislation. In Europe, EN378 is the applicable standard.
WARNING
▪
Make sure to install all necessary countermeasures in case of refrigerant leakage
according to standard EN378 (see
requirements for CO₂
▪
Make sure to install a CO
refrigerant leak detection (see
15.1
Preparing the installation site ................................................................................................................................................
15.1.1
15.1.2
15.2
Mounting the indoor unit.......................................................................................................................................................
15.2.1
15.2.2
15.2.3
15.3
Relocation ...............................................................................................................................................................................
Do NOT install the unit in places often used as work place. In case of construction
works (e.g. grinding works) where a lot of dust is created, the unit MUST be
covered.
Choose an installation location with sufficient space for carrying the unit in and out
of the site.
INFORMATION
Also read the following requirements:
▪
General installation site requirements. See the "General safety precautions"
chapter.
▪
Refrigerant piping requirements (length, height difference). See further in this
"Preparation" chapter.
INFORMATION
The sound pressure level is less than 70 dBA.
CAUTION
Appliance not accessible to the general public, install it in a secured area, protected
from easy access.
This unit, both indoor and outdoor, is suitable for installation in a commercial and
light industrial environment.
Do NOT install the unit in the following places:
"15.1.2 Additional installation site
4
refrigerant" [
45]).
leak detector (field supply) and enable the function for
2
"19.1 Field
setting" [
4
69]).
FXSN50~112A2VEB
CO₂ Conveni-Pack: indoor unit
4P602817-1 - 2020.02
42
42
45
49
49
51
52
55