Daikin FXSN112A2VEB Installer And User Manual page 54

15 | Unit installation
To check for water leaks
When installation of the system is not yet completed
Installer and user reference guide
54
b Drain hose (accessory)
c Metal clamp (accessory)
d Large sealing pad (accessory)
e Drain piping (field supply)
NOTICE
▪
Do NOT remove the drain pipe plug. Water might leak out.
▪
Use the drain outlet only to discharge the water before maintenance.
▪
Insert and remove the drain plug gently. Excessive force may deform the drain
socket of the drain pan.
Pull out the plug.
▪ Do NOT wiggle the plug up and down.
Push in the plug.
▪ Set the plug and push it in using a Phillips screwdriver.
a Drain plug
b Phillips screwdriver
The procedure differs depending on whether installation of the system is already
completed. When installation of the system is not yet completed, temporarily
connect the user interface and power supply to the unit.
1 Temporarily connect electrical wiring.
▪ Remove the service cover (c).
▪ Connect the power supply (a).
▪ Connect the user interface (b).
▪ Reattach the service cover.
a
a Power supply terminal block
b User interface terminal block
a
a
b
b
c
FXSN50~112A2VEB
CO₂ Conveni-Pack: indoor unit
4P602817-1 – 2020.02